Benches Peripherals and accessories

5

audio interface and external hard drive c…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hi. Just got the new imac 21" and I'm considering using it as my main daw with Logic Studio as an upgrade from my old sonar mobo. I usually run up to 40 tracks of recorded audio with fx plugs. I hope to do this at 24 bit 96 instead of 24bit 44 like I did on the old system. I also run the occasional softsynth and sequencer which I don't mind bouncing down to .wav to conserve cpu.

I really like the specs on the m-audio profire 2626 (I need the 8 mic inputs for recording drums) which needs firewire. But at the same time I'm reading a lot of recommendations about using an fw800 external drive for audio. I've read a little about daisy chaining and I'm wondering if anyone's gotten this type of configuration to work. I'm also open to any other configuration options you have to share that would enable my goal of successfully using this mac with logic.

thanks in advance for the help,

dave

5 replies

Sign in or join Beachball Help to reply.

  1. 0

    Gordon Grotts

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I run three firewire audio interfaces daisy chained together, 2 Presonus FP10's and an Alesis Multimix8.

    This gives me 24 simultaneous inputs. I normally record 24 bit at 88.2 . My iMac has a FW800 and a FW400 port. What I tried to do was run all the interfaces through the 400 and record to a FW800 external hard drive but I it kept dropping out interfaces, even if I used only one interface. I switched firewire cables on the hard drive to a 800/400 so that the hard drive was now operating as a 400 and I did not have any more interface drop outs.

    Even though the iMac has 2 firewire ports, they connect to a single cable to the i/o inside the Mac. If I try recording to an external hard drive, that is 24 tracks going into the Mac, back out to the hard drive, back in to the Mac and then back out to the interfaces and on to the monitor speakers. That is a lot to ask of a firewire connection.

    So, I record to the internal drive and use the external for backing up and saving the projects.

  2. 0

    Gordon Grotts

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You may have already figured this out but, incase you have not. Trying to run the interface and the hard drive at the same time through the firewire can cause problems. Every time I have tried to do this with an FW800 hard drive and a FW400 interface, the interface keeps dropping out. If I set the hard drive to FW400, it seems to work but I start to get some latency if I try to work to the external drive while using the audio interface. I have found that I have no problems if I just do all the recording with the internal drive and use the external to save back-ups to.

  3. 0

    JJs77

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hey thanks for the reply Gordon. I'm still on the fence about all of this though I've made some changes in my expectations. Most important, I've decided to stay with 24 bit 44.1 recording because it just doesn't seem to be worth the resources and effort to go any higher. I'm also considering the Saffire Pro 40 IO Firewire Interface.

    Your daisy chaining results are kind of disturbing though as I've been reading quite a bit about others doing the same thing. What kind of track counts and at what bit and sample rate are you achieving with just the internal drive? Also, how many tracks are you recording at once? I still need to be able to record 8 for my drum kit.

    thanks again,

    dave

  4. 0

    Gordon Grotts

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I run three firewire audio interfaces daisy chained together, 2 Presonus FP10's and an Alesis Multimix8.

    This gives me 24 simultaneous inputs. I normally record 24 bit at 88.2 . My iMac has a FW800 and a FW400 port. What I tried to do was run all the interfaces through the 400 and record to a FW800 external hard drive but I it kept dropping out interfaces, even if I used only one interface. I switched firewire cables on the hard drive to a 800/400 so that the hard drive was now operating as a 400 and I did not have any more interface drop outs.

    Even though the iMac has 2 firewire ports, they connect to a single cable to the i/o inside the Mac. If I try recording to an external hard drive, that is 24 tracks going into the Mac, back out to the hard drive, back in to the Mac and then back out to the interfaces and on to the monitor speakers. That is a lot to ask of a firewire connection.

    So, I record to the internal drive and use the external for backing up and saving the projects.

  5. 0

    JJs77

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    thank you gordon, i really appreciate it!