Imported from the Apple Support Forums via the Wayback Machine 🔗
When I try to 'print to video' or just play the timeline for a NTSC DV sequence, I get video and audio on my Panasonic HVX200A camera, but no timecode. The timecode display on the camera doesn't move and when I 'Log and Capture' the video that I just recorded, the 'Log and Capture' just sits there displaying 'Waiting for timecode' while the tape is actually playing in the camera.
The camera setting for '1394 TC REGEN' is set to 'on' which means that the camera will get the timecode from the firewire instead of creating the timecode itself.
The 'no timecode' problem is the same for output to tape or P2 cards.
I am using the DV-NTSC Easy Setup for device control, etc.
But.... When I output an HD (720P/60P) sequence from the timeline to the P2 cards, the timecode is immediately visible on the camera's timecode counter. I can even send the DV sequence above to the HD P2 setup and the DV timecode will show up.
How can I get FCP 7 to send the timecode via firewire to my HVX200A using a DV recording setup options on the camera?
Imported from the Apple Support Forums via the Wayback Machine 🔗
What happens when you set that TC REGEN setting to "off"?
0
Greg Wilcox·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If I set the TC REGEN to 'off' and hit the record button, the camera provides the timecode and the timecode counter increments. Same with the print to tape, the camera provides the timecode and the timecode counter increments.
And of course the camera will provide 'rec run' or 'free run' timecode during 'TC REGEN: OFF' based on another camera setting.
0
Michael Grenadier·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm pretty sure that fcp does not send out timecode via firewire. It used to way back in fcp2 (I think) but for some reason or other later versions of fcp eliminated this.
0
Studio X·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If I remember correctly there was a hack that worked with firewire and the DSR-11, but generally, the recording device provided the TC in a firewire stream out from the computer.
If you have a pro deck, you can feed TC via serial connections.
x
0
Michael Grenadier·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I think it was called simplevideo. I have a feeling it doesn't work with current OS and quicktime, but not sure.
0
Studio X·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I think it was called simplevideo. I have a feeling it doesn't work with current OS and quicktime, but not sure.
I think 10.5 or 10.4 broke it. Or, QT7. Or, FCP6 or FCP5. Something broke it. It probably worked best w 10.3.9 and QT 6.5.2 and FCP 4.5. Or 9.2, QT 5 and FCP3. Well, it did work at one time ... lol
x
0
Nick Holmes·
Imported from the Apple Support Forums via the Wayback Machine 🔗
It is a Developer Tool. You might have to register for free ADC membership to read the linked page.
0
Greg Wilcox·
Imported from the Apple Support Forums via the Wayback Machine 🔗
But I can send the time code from both a 720P/24P sequence and a NTSC DV sequence using the 720P/60P FCP video playback setup to the Panasonic HVX200A using the camera recording setup 720P/60P.
If I change the starting timecode for my active sequence from 01:00:00:00 to 03:00:00:00 and press play, the timecode sent to the camera displays the correct hh:mm:ss:ff starting with 03.
So you can output timecode using HD settings. And you can send a DV sequence to the same HD settings and see that DV timecode. Although, the DV frame is surrounded by black on all sides.
But why can't you output a DV timecode to a DV setup HVX200A?
Also, if you wanted to create a DV tape using the filters that burn a visual timecode to the tape, don't you need to be sure that you can send the timecode with video so that they are in sync when recorded? You wouldn't want the camcorder to provide timecode that doesn't exactly match the burned to image timecode?
0
Michael Grenadier·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hey, we're not happy with the situation, but as far as I know, that's the way it is. If you can preset your timecode on the camera or deck, you can make this work by blacking the beginning of the tape with the timecode you want switching the timecode generator on the camera or deck to regen, and making the in point in the edit to tape window match your starting timecode of the sequence., otherwise it just isn't going to happen with dv unless you can get simple video to work.
0
Nick Holmes·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Well, I never send TC from Final Cut Pro to tape.
Instead I prepare the tape by blacking the first twenty, thirty seconds and then use an assemble edit with bars, black, program, black.
If I send VizTC to tape, it's for one of two reasons: to make the tape commercially useless (a preview copy) or to reference the source footage by using a TC Reader filter. Both will be accurate -the first because of the method described above, the second because it uses the original clip's TC to show the client exactly which take I used.
0
BenB·
Imported from the Apple Support Forums via the Wayback Machine 🔗
You have to set the HVX200 to generate it's own TC when using print to video, as FCP expects the deck you're sending to will generate it's own TC, as this is a much more technically actuate operation than then deck reading FCP's TC. It's the unstable nature of Mini-DV tape.
"Output" to P2? You can't output to P2, you can only output to DVCPRO-HD native QT files, which have TC embedded.