Imported from the Apple Support Forums via the Wayback Machine 🔗
All of a sudden my emac won't read the external drive. It "knows" it is there because it will turn on when I restart the computer but I cannot access it. I tried it on my ibook and it worked just fine but I am having no luck getting the emac to recognize it. Strange. Any advice?
Imported from the Apple Support Forums via the Wayback Machine 🔗
Perhaps you have the sort of common temporarily dead Firewire ports problem (assuming you are connected via Firewire). To see, power down the Mac completely. Unplug the Firewire devices, and unplug the Mac from the power cord (either at the Mac itself or at the wall plug). The Mac has to be disconnected from the power source, not simply turned off. Now, as stated in a previous post of mine on this subject, put on a pink tutu and dance around the room for five minutes or so. Now plug the Mac back in and power it back up. Attach your drive and see if it now shows up. Remove pink tutu. Patrick
0
Prof Chris Rapley C.B.E.·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi - since upgrading to OSX 10.3.4 I have had two external LaCie firewire drives fail progressively. Both went through a (brief) phase of producing (JPEG) file errors and then the icons ceased to appear on the desktop. One is a D2 (160Gb) which clics gently to itself when mounted. The other is a (porsche)portable 80Gb drive which is "dead" to my Macs via firewire, but can be read via USB2 on my (work) laptop (apologies all round). It may be complete coincidence, but immediately following the same upgrade an internal ATA drive on my Quicksilver G4 became invisible, tho disk utility sees it fine. I will try the pink tutu routine this evening, but in the meantime, if anyone else has had a similar experience or spots another link with this little mystery, I would be pleased to hear from them.
G4 Quicksilver, iMac G4, iMac G5 Mac OS X (10.4.3)
0
olaf69·
Imported from the Apple Support Forums via the Wayback Machine 🔗
wouldn't that work better with a purple tutu?
0
JMVP·
Imported from the Apple Support Forums via the Wayback Machine 🔗
icecrystal13,
How old are the LaCie drives? If about 1 to 1 1/2 years, try contacting LaCie with the serial numbers. LaCie was bitten a while back by a number of faulty power supplies shipped to them by their vendor; the power supplies would pass incoming quality control tests, and usually run fine for a while, but then start failing. If the serial numbers of your drives are within the affected range, LaCie should replace the drives --- they have an excellent reputation for service.