Benches Peripherals and accessories

6

No SCSI on OS X

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have a Wallstreet with a fresh install of 10.2.x. I want to use a SCSI only Film scanner. The scanner works fine in 9.2.2 but I cant get the SCSI to work in OS 10.2 (The max OS for this PB)!

Why does this Wallstreet not see the built in SCSI bus. (Does NOT appear in the Apple profiler)?? Ive tried switching SCSI numbers and termination on/off. No go.
Ideas?

6 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    SCSI support is pretty bad in OS X no matter what Mac you are using. Usually people have problems with SCSI cards, but it sounds like you're having a problem with the built-in port. Not sure what to do about that.

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Steve,

    SCSI scanners and OSX are not very happy together. Most users employed a third-party app called VueScan:

    http://www.hamrick.com/

    However, VueScan has moved forward and no longer supports 10.2.x; you need to find an older version compatible with Jaguar and I don't know a source. You might also try a seach for 'SCSI scanners' on http://www.macosxhints.com/.

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    That is what I'm trying to use.
    Yes the creator of Vuescan sent me a custom version to try in 10.2. It bounced in the dock twice then vanished.

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I've used VueScan successfully to drive a SCSI film scanner in OS X via a FireWire-to-SCSI adapter. But the Wallstreet doesn't have FireWire, right? And I think I was beyond 10.2. Lots of obstacles to overcome there. If you have any access at all to a slightly more recent Mac, you would get past these problems.

    Or...you just run that machine on OS 9, which is how another old Mac of mine kept running SCSI devices.

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Right, NO FW. OS 10.2.8 is the limit.
    Ed Hamrick just emailed me and said basically "IM screwed". Vuescan wont work.

  6. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have a Wallstreet running 10.2.8 and a Umax scanner hooked up to it.
    I had lots of problems ( since resolved - termination and ID problems mostly ) using the onboard SCSI port so I bought an Adaptec Slim SCSI 1480 PCMCIA card instead and used the beta 1.0b scanner driver from Adaptec.
    These cards come up for sale on ebay every now and again for $10-$20.
    Make sure you get the Mac one ( I don't know if the PC version works in a Mac )and also make sure the seller includes the cable adapter ( 25 pin SCSI to the PC card port - unsure what the card end is called ).
    Your issues also may be more from the scanner end rather than the Wallstreet too.

    Stewie