Benches Peripherals and accessories

15

Magic Mouse keeps disconnecting from blue…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

My magic mouse (with all updates properly installed and with USB Overdrive properly uninstalled) has a problem connecting and disconnecting from the computer. When I use the mouse for a few minutes, it will all of a sudden be non-responsive, and within a couple of seconds the "Connection Lost" message appears on the screen. If I wait another minute, and click the mouse button a few times, the mouse will reconnect. This happens periodically as I am using the computer.

In the console logs, I get these messages:

10/31/09 6:06:20 PM kernel [0eb48f00][AppleMultitouchDevice::willTerminate] entered

10/31/09 6:06:20 PM kernel [0eb48f00][AppleMultitouchDevice::stop] entered

10/31/09 6:06:24 PM kernel [0ffa3600][BNBMouseDevice::init][30] init is complete

10/31/09 6:06:24 PM kernel [0ffa3600][BNBMouseDevice::handleStart][30] Done

10/31/09 6:06:24 PM kernel [08701100][AppleMultitouchHIDEventDriver::start] entered

10/31/09 6:06:24 PM kernel [09f11680][AppleMultitouchDevice::start] entered

The first message is when the mouse disconnects, and the rest are when it reconnects.

Does anyone have any suggestions?

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    wederd

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    It really is worth fixing! Best mouse!

    My magic mouse suffered from the batteries shifting downwards and not along the length:

    When I lift the mouse and it hits the surface again. If your setup has multiple displays you do this a lot. And sometimes everyone reaches the end of the proverbial mousepad but needs to go... further.

    THE FIX - I saw great suggestions of ~ 1 x 1" cardboard tile taped to the inside of the battery cover, i could only find a thin paper so I used a dime instead. Placed between the battery cover and the batteries It is slightly too thick but the problem disappeared instantly. I can mouse as athletically as I please now.

    So I think it was not the length of my batteries but the diameter. And definitely not inerference or settings in OSX.

    The issue definitely did vary between battery brands, but the big brands failed me sometimes too!

    EDIT [[The reason it sometimes seems to re-connect on its own is probably the fact that people turn it upside down to check the green light or if there is debris on the lens, and they fall back ito place.]]

  2. 0

    eugenefromcranbrook

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    This happened to me. Try putting foil paper between the battery

    and male connections. Works 100% for me.

  3. 0

    MacTriker

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Earlier this year, my wife's iMac began failing in ways that had Apple support scratching their collective heads. So insidious was this iMac fail (covered by Apple care) that even after letting their techs have it in their possesion for 48 hours, they finally said (similar to Penn & Teller saying to a visiting magician, "You fooled Us"), Mr & Mrs H, here's the problem. You have a lifetime guarantee and we can't fix it. So they shot us. No no no, that didn't happen. They said, your iMac is obsolete now so we have to replace it with an all new iMac. I gave my old iMac to my wife and took the new one so that my wife would not be plagued with any new features that she wasn't expecting. My old one was exactly like her old one and she is very happy with it to this day. Stay with me here. It's coming. The point, I mean.

    With this new iMac came two new items that I wasn't even aware that Apple was selling. A keyboard and mouse that neither one uses removable batteries. They both plug into a lightning cable to recharge (just like my iPhone).

    This is the SOLUTION to your wireless mouse that continually disconnects from Bluetooth. My new mouse has never disconnected unless I was charging it. No batteries that were made to incorrect specs, or had been shrunken or for some other reason, lost connectivity to the internals and therefore lost connectivity to Bluetooth.

    Geet the new keyboard and mouse and GETOVERIT as the Eagles sing. (You remember the Eagles don't you?)

  4. 0

    dthom13

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Many thanks. So far deleting it from Bluetooth and re-pairing it seems to have worked. We'll see if that solves the problem permanently. I don't think it was ever a battery problem, as it always showed as 100% or nearly so (after replacing my old batteries).

  5. 0

    nigs67

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I found if you drop it from a high of about 2 or 3 inches it works again. Magic.

  6. 0

    arunakn

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Try this. might help

    1. From the OS X desktop, hold down the Shift+Option keys and then click on the Bluetooth menu item to reveal the hidden Debug menu
    2. Select “Reset the Bluetooth module” from the Debug menu listUser uploaded file

    3. When finished resetting, reboot the Mac as usual and go through the process of connecting the Bluetooth device(s) to the Mac as you typically would, everything should now work fine. (If you have another set of keyboard and mouse reset all connected apple devices and restart.)

    Hope this will help.

    ***Thanks to our friend Keir over at MacKungFu for discovering the debug menu item ***

    ArunA

    <Links Edited by Host>

  7. 0

    wederd

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Regarding the very helpful video you linked...

    Tip - would skip to the second part of the solution- fill the space between batteries and cover -

    which works on its own.

    There is no problem with the snugness of the connectors - the springs are good and firm, but when the batteries shift down, the connector is at an angle. Pre-flexing the springs does not make them stronger, it just gives them less range by deadening the first portion of the range. When the mouse hits a bump or you set it back down, they can still shift down.

    Also, regarding the first part of the solution, if the two pieces of aluminum shift slightly and touch each other, you will have a short circuit situation, albeit at low voltage.

  8. 0

    skesinis

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I never had this issue for over 3 years and it only started recently.

    After reading some responses mentioning the batteries,

    I noticed that the ones I was using ("Everyday" brand) had a pointy tip at the positive end,

    while those I was using before were flat at that end.

    I just replaced the batteries with some "Energizer" alkaline and the problem disappeared.

    Before that, I kept cleaning the battery tips and the battery contacts on the mouse and it was

    working for a while but then it would start again.

    I hope that helps.

  9. 0

    BomerneeTV

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I feel so stupid now...checking my battery compartment appears some dirt on the contacts! Scraped off and fixed my problem. I was getting drop outs and felt it was the battery not connecting as it wasn't consistent with it drops! Seems to have resolved my issues now!

  10. 0

    Dancin_Brook

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    It is most likely the contacts. Doesn't matter the "quality" of the battery. I have Apple's batteries and it occasionally happens to me. To check, delete the mouse in Bluetooth preferences, turn the mouse off, then on, don't use the mouse. Set it someplace near that you won't jostle it. Pair it again. If it stays connected, after a while (like much longer than it took to disconnect previously) start to use it. If it disconnects, it's likely a contact issue. See other posts for cleaning the contacts in the mouse and on the batteries. Suggestions elsewhere indicate some tips to force a better connection, or resetting the bluetooth module, but I've not had to do any of those things.

  11. 0

    Aquarelle528

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have Magic Mouse 1st Gen and it keeps disconnecting too. I tried all the solutions I could find: resetting PRAM, deleting preferences, adding in Favorites, changing batteries, putting aluminium foil, putting a folded piece of paper... nothing works. I have an Apple Keyboard and it works fine, without disconnecting at all, so the problem isn't the BlueTooth of the MacBook (Pro 15-inch, 2012, El Capitan). Any suggestions?

  12. 0

    K T

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If you've done due diligence on the latest software, I'd have to ask if you've made sure your immediate environment isn't radio wave saturated. Shut off as many wireless gadgets close by as you can and keep trying...

    You can also try resetting some of the hardware involved (PRAM~NVRAM). See this Apple KB for details, etc.:

    http://support.apple.com/kb/HT1379

    Can't hurt to try, and apparently this has helped others recently.

    If still no joy, walk the MB and the MM in to the nearest Apple Store and see about making it their problem 🙂

  13. 0

    AZtoni

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    My problem exactly. Very, very frustrating--since it took me more than an hour to install!

  14. 0

    Dana Spiegel

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Going to the Apple store is my next move, though given that the NYC apple stores are always booked, this might take a while.

    I don't like in a radio saturated environment (or rather, not one that has an excessive amount of 2.4Ghz noise. Other bluetooth devices in my apartment function just fine.

  15. 0

    shawk

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    same issue here. I use a bluetooth headset and mouse with a my PC and it is pretty reliable. Also was using a logitech wireless mouse with a dongle and it worked great. Been trying to use the magic mouse but it disconnects very frequently. I'll chill and wait for a software update.