Imported from the Apple Support Forums via the Wayback Machine 🔗
My ISP requires a static IP address. When I connect my MacBook pro to ethernet and set manual properties it always sticks and works. However when I set up my airport extreme manually it always changes the ip address to one that is non functional and will not let me connect to internet. How do I get the IP address that i set to remain saved after every restart.
Imported from the Apple Support Forums via the Wayback Machine 🔗
The whole point of a home router is to let you share one real-world IP address amongst more than one computer in the house. In order to do that, the home router must give out new IP addresses that's in the private address pool (which are not valid on the outside world), and then the router will direct outside traffic to the correct home computer on the inside.
To use a static IP address assigned to you by the ISP. You open the Airport Utility, select the AEBS on the list and click manual setup
Go to the Internet pane and setup as follows:
Connecting Using: Ethernet
IPv4: Manually
IP Addr: Given by ISP
Subnet Mask: Given by ISP
Router Addr: Given by ISP
DNS Servers: Given by ISP
Sharing: Share a public IP address
0
bigmac99·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I entered information as you suggested. However when i restart the AEBS the IP address has changed to one that is not functional to get on the internet. No matter how many time I manually put in the IP address it won't stick. I know the settings work because when I enter the settings on a Linksys router-everything works.
0
T-Wib·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi dchao99,
You wrote the last setting is
Sharing: Share a public IP address
Why wouldn't DHCP be applied here?
Thanks
0
JABintheQC·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I followed the above instruction to at the Static IP info that was sent by my provider. It worked for one day and has been spotty for a week. Please help me with DHCP settings, I am not sure what to use. Thanks so much!!!