Print delay with Time Capsule
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello,
Got the TC hooked up and did a backup for 3 macs around the house. That worked fine. Wireless speeds are good.
However, printing isn't quite up to speed. When I print a document (for example a single sheet of text) it takes between 5 and 20 minutes to come out of the printer.
My three computers have all finished their initial back-up and are all essentially sitting idle, so I don't think the TC is especially busy.
I uninstalled and re-installed the printer (Brother ML-2010 - TC had no problem 'seeing' it), did all the software updates (10.5.2), turned the printer off/on, etc.
Any ideas? Having the printer fire up and print 20 minutes after hitting the print button is kind of odd.
thanks,
15 replies
Sign in or join Beachball Help to reply.
- 0
The Real DJ SASH ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
What if you connect the printer directly to the computer, does it also take that long to respond?
- 0
Steve56303 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello,
No. I've been using this computer / printer combo (wired with the same USB cable I now have between the TC and the printer) for some time and it worked exactly as one would have expected. Maybe a few second delay while the printer warmed up and then printed, but that was it.
- 0
Steve56303 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Just tried another idea.
The first computer in this thread is wireless.
I hooked up my desktop with an ethernet cable to the TC, installed the latest printer driver (it was a Samsung ML-2010, but a Brother as typed above), and installed the printer. Again the system had no problem installing or "seeing" the printer.
I then printed a 6 page document. It took about 5 minutes and then the first page printed, and now it has been several minutes and the second page still hasn't come out.
So everything works - it just takes a really long time.
Maybe there is a print buffer size in the TC that needs to be set at a higher level?
Any other ideas? Thanks,
- 0
Steve56303 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello,
Some time with AppleCare later I've figured out that this problem is specific to the Samsung ML-2010 printer (and maybe other printers). When I hook up my Brother 4800 MFC to the TC it prints just fine.
I'm going to try and contact Samsung to see if they have any updates, but on a $70 printer I'm not too hopeful.
Steve
- 0
Michel Schweizer ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Helllo,
Same thing here in sunny Switzerland with a Samsung ML-1510. I waited maybe 30 seconds and I discarded the print jobs. No problems to find the printer or send the print job but no printing right away.
Hope something from Samsung but not sure they will try very hard (or at all) since the printer has three or four years.
Best regards.
Message was edited by: Michel Schweizer
- 0
MiltonDuffy ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello,
I also have the same problem and my printer is brand new (Samsung CLX-2160). Hopefully someone can find a solution for this problem.
Best regards
Message was edited by: MiltonDuffy
- 0
Mistermac106 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
This isn't a solution, but did allow me to print wirelessly with my Samsung printer:
I had the same problems with extremely long print delays with my SCX-4x16 Printer through the time capsule. To get around this, I plugged my printer back into my iMAC directly. I then allowed printer sharing (Apple>System Preferences>sharing). I then had no problem adding my printer on my MacAir. It prints perfectly.
Cheers - 0
TMANYC ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm having the same issue with my ML-1630. Things were just fine with my AirPort Extreme, but instantly after switching to TimeCapusule, it takes 30 40 minutes for items to print out. I've downloaded the most recent drivers from my Samsung ML-1630, but nothing fixed this.
Please help very soon. This is the printer I bought off of the Apple site and was featured. I need to be able to rely on printing.
- 0
HomesteadDan ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I had similar issues with a Brother MFC 8220. Prior to getting the Time Capsule, I had it connected to a PC on my network and shared it that way. When I received the Time Capsule, I connected the printer to the USB port. The good news was that my MacBook had no problems at all finding it, installing the drivers and printing. The bad news was that a print took several minutes to spit out the first page. The worse news was that the PC was no longer able to print to it at all. It "saw" the printer, said it was connected, but when I'd try to print something it would go into the queue, and after a couple of minutes I'd get a print error message from Windows. I stripped out the drivers and installed the latest from Brother, with no joy. Spent about 2 hours on this, finally gave up and went back to the initial configuration, which works fine, with no print delays, from all computers on the network. Harrrumph!
More good news - no problems at all with backup or basic net connectivity. TC is working well on 2/3 of the functionality that I bought it for, and this is better than I've come to expect from the PC world!
- 0
Winston Wolf ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi everyone,
I also had the slow printing problem with my new Time Capsule. I wanted to share my HP LaserJet 3200 using the USB port. My wife and I both have a MacBook Pro 15" (2.16 GHz Core Duo) running Mac OS X 10.5.2. I am using the Gutenprint driver for the LaserJet 3200.
It takes a few minutes to print the test page when the printer is connected to the USB port on the Time Capsule. The test page prints almost immediately when the printer is connected to the USB port on my computer. I also shared the printer on the network using an HP JetDirect 170x print server (borrowed from work) and it also prints immediately. So this slow printing problem is definitely related to the Time Capsule.
Chris
Message was edited by: Winston Wolf
- 0
roadsterDirk ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi,
same problem: Samsung CLP-300. Prints on the mac fast. After connected to Time Capsule it needs up to 30 minutes for one single page. As the list here is so long I don't believe in an driver issue. It's really looks like a time capsule problem. Apple: please fix this!
Ciao
Dirk - 0
mje715 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Same problem, Samsung ML-2010. This printer worked fine when shared from my Mac Mini, and also when shared from an Airport Express.
- 0
LESLIEx317537 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
There is another thread similar to this.
I have the same issue with my Samsung ML-1710 with 10.5.2 and my Time Capsule.
Leopard has trouble printing, but Vista Ultimate and XP MCE can print to it no problems. - 0
Scott Matheson ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I had success with getting a Samsung ML-1630 to print via Time Capsule this way:
*Plug printer to TC using USB cable.
*Check what services TC is advertising for your printer using a program like Bonjour Browser.
*Look for a Printer PDL Data Stream - see what IP it is advertised on, should be the IP of your TC - usually 10.0.1.1 or 192.168.1.1, with a port number of 9100.
*Set up a new printer in Print & Fax panel by clicking the "+" button
--then click the "IP" icon in the panel that appears
--choose settings as Protocol: HP Jetdirect - Socket
--enter the IP address of your TC that you found above (leave the port number off)
--leave the queue name blank (those with multiple USB printers connected will want to experiment with this)
--you can set name and location as you like
--select other driver and navigate to the appropriate PPD from /Library/Printers/PPDs/Contents/Resources/Your new printer should work as long as you don't change the internal IP of your TC. (As far as I can tell, the reason this works is that is avoids the flakey riousbprint service, forcing the Mac to print to the Jetdirect socket on port 9100. This would also explain why some posters are able to print from Windows machines but not Macs - avoiding mDNS/Bonjour/Zero-Conf is more stable, in my experience.)
Note that this setup will not necessarily allow you to print to your home printer from elsewhere on the internets, so if that's your goal, this may not be the solution for you.
Note also that I consider this a workaround at best - not a solution (hint... firmware update... hint...)
Message was edited by: Scott Matheson
- 0
dsteed ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
hmm.. i never got my samsung scs-4x16 printer to work with the airport extreme. so i did what i used to do- attached the old trusty cube via ethernet to airport, usb cable to the printer, shared it and bingo. i worked on this for a long time, trying various drivers and so on- i only got printouts from my printer saying "Internal Error - False" and so on.