Benches Networking

15

Airtunes and Error -3256

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have a MacBook Pro, and an Airport Express attached to my living-room stereo. I can play songs from the Mac for like 2 minutes over Airtunes, then invariably I will get:

"An error occurred while trying to connect to remote speaker Living Room. Unknown error (-3256)"

This does not happen on my Dell Laptop, and it never happened before yesterday on the MacBook Pro (I downloaded a lot of updates yesterday).

What can I possibly do to help? Apple doesn't even know what to do.

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    Michael Piperno

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I've had this same problem with my MacBook Pro running Leopard for the past few months. It's making me crazy. My setup worked fined for 2 years, now I can rarely use my computer to play music throughout my house without errors or dropped connections.

    One thing that helped for a while was a factory reset of my Airport Extreme base station and my AEs. Got about 3 weeks of error free music after that.

  2. 0

    downinitjr

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Have you checked the airport express to make sure you have updated the firmware on it to the latest version.

  3. 0

    ryandward

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Ya, I just got the airport express a week or so ago, it has all the newest firmware on it.

  4. 0

    downinitjr

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Turn off ipv6 in system preferences>network.

    Also

    Open System Preferences, choose security, then open the Firewalls tab.

    select "allow all incoming connections"

    Also log into your router and make sure there are no setting turned on to block udp traffic.

  5. 0

    ryandward

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You're not going to believe what KIND of solved it. If I play it from my computer's speakers as well as the living room's speakers, it no longer gives me that error. However, it still cuts out sometimes, but it doesn't give me the -3256 error, it just continues to play on the computer, and then in a half second or so, the living room speakers will kick on again too.

  6. 0

    ryandward

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I fixed it.

  7. 0

    will_R

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    How did you fix the problem? I am trying to resolve a similar situation for my sister. She has speakers hooked into an Airport Express and when she uses airtunes on the SPEAKERS ONLY (not multiple speakers) she gets the error after about 5 songs or so. I've updated her firmware on the airport express, and installed every other update for the OS and iTunes, but the problem has persisted.

  8. 0

    CiamS

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I updated to iTunes 8 yesterday. Up until the update all worked fine with airtunes--I was able to stream from both my mac and my pc. After the update I get error 3256 on both machines.

    All suggestions to fix thus far seem to involve changing the IPv6 settings (mine was set to auto, but I tried off as well to no effect). The UDP setting pertains to the firewall which I don't use.

    Lastly, as far as I know the router is updated to the latest firmware. I've rebooted the router a couple of times but have been avoiding a full reset.

    So, my question--while iTunes 8 seems nice and the genius feature is cool, I'd rather have my speakers available. Can I roll back to the previous version? Barring that, does anyone have a line on a fix that isn't mentioned in this thread?

    Wow, completely frustrating.

  9. 0

    PaulOByrne

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Just this weekend, I tried to use the original Mobile Base Station (802.11g) with AirTunes from iTunes 8.0. I am getting the error (-3256) - regardless of plugging in stereo amp jack or simple headphones. My IPv6 is set to auto and the latest firmware has been loaded. Can anyone help?

  10. 0

    dtallerico

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm still having this problem with Airtunes and iTunes 8. Can anyone share a solution?

    Thanks

    -David

  11. 0

    Klein Jr

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    An error occurred while connecting to the remote speaker "NAME". An unknown error occurred (-3256).

    I also receive the error above while trying to play from iTunes 8.0 (and now iTunes 8.1) on my MBP to an AirPort Express. Able to stream fine from iTunes on WinXP and iTunes on Vista. I have several AirPort Express units, and streaming to any combination of them results in the same error.

    I upgraded to firmware 6.3 long ago. The problem seemed to correlate with installation of iTunes 8.x, though I can't confirm since I ignored this error the first few times I saw it. I do know that streaming worked consistently/perfectly for a LONG time and then just suddenly stopped working and started to give this error every time.

    Sending the stream to "Computer" and my AirPort Express simultaneously does not prevent the error. I still receive -3256 before the stream begins playing on my MBP.

    This does not appear to be a firewall issue, since temporarily changing firewall to "Allow all incoming connections" does not resolve the problem.

    This does not seem to be an IPv6 issue. I thought I had disabled IPv6 long before this stopped working, but changed back to Automatic settings. My MBP is setting a self-assigned address. I can't see any type of IPv6 address within the AirPort settings in the AirPort Utility though. If IPv6 is required for streaming to the AirPort Express as of iTunes 8.x, I suppose this could be a problem.

    I've tried rebooting the AirPort Express (ie: unplug power, replug power). I've also tried reapplying the 6.3 firmware for at least AirPort Express, then restarting iTunes 8.1 (just in case).

    Running out of ideas for now. Will revisit this soon and will post if I come up with anything.

  12. 0

    Klein Jr

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Possibly resolved this problem on my MBP. I was able to get this working without error again by changing "Configure IPv6" to Automatic, then restarting iTunes. I kept changing settings and trying to stream a song over and over, but hadn't been closing/opening iTunes each time I tried something new.

    It seems that changing "Configure IPv6" to OFF, then restarting iTunes will cause iTunes to return error -3256 again. Changing back to Automatic, then restarting iTunes again causes iTunes to begin working again.

    I should have caught this myself, but it'd be nice if Apple had mentioned restarting iTunes in their article below. I believe their article was the first thing I read/tried before researching. Didn't occur to me that you'd have to restart iTunes. The restart is probably required so that iTunes can bind to a UDP port on your newly assigned IPv6 address to listen for feedback from the Airport Express unit(s) you are streaming to.

    Hope this info helps someone out there. 🙂 -j

  13. 0

    Dave Pearson

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi there, I am glad to hear you figured it out. I am having the same issue with all three of my airport express units. Would you mind telling me where I need to make these changes step by step?

    I poked around in iTunes and I don't see a place to make the change you mentioned to automatic. I also looking in the airport utility and couldn't find it.

    Hoping you can share your insight.

    Thanks!

  14. 0

    jotz

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have three Macs at home that are all tied into Airtunes through my stereo (at different times of course) and I get the same error message on all three. I think it has to be the Express hardware itself. Firmware is up to date. Setting configs are all the same. I switched over to Airfoil during this and found the signal would drop out every ten seconds or so whereas it worked fine when Airtunes was working. My Express is about four years old. I wonder what the lifespan is of these things. I did a factory reset and all is working for the moment.

  15. 0

    Dave Pearson

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I updated the firmware on each of my airports and confirmed all of the settings from the help documents and restarted itunes and now everything is working fine.