Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi, my problem is:
I bought this Airport Extreme Base Station and I´m having lots of problems trying to get it configured, I have tried with the Mac's Airport Utility, with the Windows version too, also with the AirPort Extreme Admin Utility v3.2 on Windows but nothing. This Airport was working but I wanted to change the SSID and the access key but I just can not, I want to know what can I do to configuring it as a normal router. Thanks in advance.
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello isaacmb. Welcome to the Apple Discussions!
The Model Number M8440 is actually an AirPort Base Station, not an AirPort Extreme Base Station. It is only capable of providing a 802.11b wireless network. It is also called the "Dual Ethernet" model as it has one WAN & one LAN Ethernet ports.
I did get info and checked the "open using rosetta" checkbox, only to get the message "You can't use this version of the application AirPort Utility for graphite and snow.app with this version of Mac OS X."
The newer Airport utility cannot see the device, although i can choose it from my airport icon, and join the network.
I am using it to connect right now, in fact. The problem is, I cannot admin the network, rename it, or give it a password, so all my neighbors can use it now also if they wish.
0
CraigHapp·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Brandinator, so I take it you were successful in getting your old dome airport to work with Snow Leopard? I downloaded that app, and I was trying to do the same with no success. Please advise again, step by step, how you made it work. Thanks!
0
CraigHapp·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am attempting to do a factory reset on a M8440 I purchased. I am using Aiport Admin Utility 3.1.1, on a old Powerbook using OS X 10.2.8
I followed the instructions provided here for resetting an AirPort base station, doing both a soft reset and a factory reset:
After following the steps, when I use rescan to find the reset Airport, it cannot find it at all.
When I go back into network preferences and tell my system to reconfigure Using DHCP, and then run Admin Airport Utility, the Airport is visable, however it does not indicate that a reset has been done on it, nor can I access to reconfigure as I do not have the password.
Please advise as to how I can get the Airport reset??
Thanks!!
0
Ed Mansky·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi,
For the M8440 Airport base stations, you'll need to connect the base station directly into your laptop, via an ethernet cable from the LAN port on the base station to the ethernet port on your laptop. Then, bring up your AAU 3.1.1 to finish the reset.