Benches Networking

3

HP officejet J6480 stopped printing with Airpor...

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

My HP Officejet J6480 suddenly stopped printing wireless. I have my Mac and the printer on a network with an Airport express. The printer prints fine with USB. I have checked all HP software, drivers, and used the wizard to "reconnect" to the Mac. Everything is appropriate that I can tell. When I do the network setup with HP printer, it recognizes my network/router, but then asks me for my "WPA Key." I have no idea what this is or where to retrieve it to enter into the HP printer. Is this the final step to connect wirelessly??? How to I find how about the WPA key that will provide wireless connectivity??

3 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The WPA or WEP key is the wireless encryption password you specified for your wireless network. If you no longer recall what it is, you'll have to reconfigure your Airport Express with a new one, and supply the new password to all your wireless equipment.

    If you're still having trouble finding the printer, it may be due to having configured it to receive its IP address dynamically. That's appropriate for most wireless clients, but not for printers. Your Express may have reassigned its address to something else when it appeared the printer no longer needed it. A power failure will also cause a router to reassign IP addresses.

    When that happens you have to create a new printer queue in OS X Print and Fax preferences, since the printer is no longer in the same "place", network-wise. For that reason, it's a good idea to specify a static IP address for printers. That way, its IP address never changes, and you don't have to create a new printer queue every time various iMacs, iPhones and other iThings drop in and out of your wireless network.

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I, too, have recently begun having horrendous printing problems. My setup is as follows: Comcast broadband connected to my (2006) AirPort Extreme Base Station, which is connected by ethernet to a Dell Inspiron desktop. I have two Macs, which had been able to print to the HP J6480 with no difficulty.

    My HP OfficeJet J6480 is set up to print wirelessly, getting its signal from the AirPort Extreme.

    HP's software keeps telling Windows that my printer is offline. The Windows Control Panel, however, says it is online. My MacBook can find it; my iMac cannot.

    The printer used to have a "static" IP address of 10.0.0.3, but I cannot seem to verify that, any longer. I have no clue what's going on.

    Any help would be much appreciated!!!

    Bill

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Try this: Printer troubleshooting for AirPort Base Stations

    When you assign a fixed IP address, make the address high enough so that it isn't likely to be used by any DHCP clients. For example, if your DHCP server configured to issue addresses in the 10.0.0.x range, make the printer 10.0.0.100.

    After you change the printer's IP address, you will have to re-establish communication by adding it again in System Preferences. Delete the previous printer queue to avoid confusion.

    This may be the cause of your difficulty. It's a good workaround for the older "round" AEBS; only the newer ones can reserve IP addresses.