Benches Networking

2

"Network host busy" error

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hi, everyone. I have trawled this discussion list and followed all the advice available to no avail. Any help would certainly be appreciated.
The background is as follows:
MacBook Pro, 2.33GHz Intel Core 2 duo, 2GB RAM, currently running OSX 10.6.2. Software up to date. Previously on OSX 10.4.11 until 4 weeks ago. Printing to a networked HP 4100 with a fixed IP address in the office worked fine until last week, when a "Network host busy error, trying again in 30 seconds" error arose. Printing from the other workstations (iMacs on 10.6.2) on the network continues to proceed normally. Steps I have taken include deleting the HP4100 print queue and re-installing (several times) as IP>HPJetDirect socket to 192.168.1.100. Clearly the printer is online (it says so) and is identified as the correct printer driver is selected automatically (HP LaserJet 4100 series v 3010.107) and all the configurable options are correctly selected (trays 2,3 & 4, envelope feeder and duplex option) and toner supply levels are correctly read. Still get network host busy error. Rebooted the printer. No avail. Rebooted the router. No avail. Reinstalled HP printer drivers from here: http://support.apple.com/downloads/#printer%20drivers%20mac%20os%20x%20v10.6. No avail. Have also reset the printing system (losing all the other print queues in the process!) to no avail. Checked the printer setup on the iMacs that can print, and it is identical to that which I am attempting to install. Have I missed something? Anyone with any clues, please?

🔧 Closest iFixit match: iMac Intel 27" Retina 5K Display 2019-2020
Take-apart guides & videos on iFixit →
Double-check this is your exact model before ordering parts.

2 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi there,

    If you have your HP printer queue configured exactly the same as other Mac's that are working fine, and with all the steps you have taken thus far, then I can only suggest that you either have a network issue or something blocking the path.

    So first thing is to check that you are set to the same subnet as the other Mac's. This can be confirmed via the Network Utility under the Info pane. You may have to change the drop menu from Ethernet (en0) to Airport (en1) depending on what you use. Typically the first three sets of numbers of your IP address is your subnet, while the last number is your network address. So, based on the printers address of 192.168.1.100, your Mac should have a subnet of 192.168.1 and a network address other than 100.

    If the IP address for your Mac is set to the same subnet as the HP then while Network Utility is still open, select the Ping tab, enter the IP address of 192.168.1.100, set the number of Pings to 4 and press the Ping button. You should get a response from the printer.

    If you do get a response then it is safe to assume that the network setup on your Mac is okay. At this stage I would check that your Firewall is disabled (located in System Preferences > Security).

    If the firewall is not enabled then my last suggestion is to create another printer queue to the HP, this time selecting IP > LPD for the protocol. Since HP wrote Socket then it is odd that it would not be working, but a network host busy would indicate that the Mac cannot either communicate with the IP address or the Port of the selected IP address. By changing the protocol from HP Socket to LPD you are basically setting the Mac to connect on port 515 instead of 9100.

    Note that if the other Mac's show the print queue URL as "socket://192.168.1.100/" then they are using HP Jetdirect also so it would make no sense that your connection to the same port would fail. But it can't hurt trying an alternate protocol when you have tried everything else...

    HTH and reply if needed.

    Pahu

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    PAHU, you have hit the nail on the head! The Mac was on the same subnet as the printer with an IP address of 192.168.1.30. And there cannot have been any port problems on the Mac because I was able to print, on another network, to an alternate HP printer with a sockets connection. But you set my mind to thinking. For better or for worse I have Little Snitch installed, and checking the LS Configuration I discovered a 'deny' rule connecting on port 9100 to 192.168.1.100!! I have no idea where that snuck in, but it is now deleted and I will bet London to a brick when I check on the network in the office tomorrow all will be fixed! Thanks heaps, there sure is nothing like logic to solve computer problems!