Benches Networking

14

Time Capsule and 2Wire 2701 HG: Apple Support Communities

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hello I am about to purchase a Time Capsule and am wondering if anyone can provide me with detailed setup instructions to use this with my 2Wire 2701 HG

Thanks

14 replies

Sign in or join Beachball Help to reply.

  1. 0

    Bob Timmons

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Welcome to the discussions!

    You will have the option of connecting the Time Capsule to one of the LAN ports on the 2Wire using an ethernet cable (recommended), or you could also configure the Time Capsule to "join" the wireless network that the 2Wire is creating.

    The downside to the "join" option is that the 2Wire creates a one band, slower "g" wireless network. If you configure the Time Capsule to "join" the 2Wire network, in effect it becomes nothing more than a wireless backup device using the slower "g" wireless speeds.

    If you are able to connect the Time Capsule to the 2Wire using an ethernet cable, the Time Capsule is capable of also creating a faster dual band wireless network. Backups will occur over the wireless network or, if you prefer over ethernet.

    So, which would you prefer? The Time Capsule to "join" the 2Wire wireless network, or the option to have the Time Capsule create a dual band wireless network that you can use for backups either using wireless or ethernet.

  2. 0

    sharonvaughters

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thank you

    We would want to connect it using the ethernet cable using the dual band wireless network.

  3. 0

    Bob Timmons

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Here is how to configure the Time Capsule:

    Connect one ethernet cable from one of the LAN <-> ports on the 2Wire router to the WAN (circle icon) port on the Time Capsule (TC).

    Temporarily, connect another ethernet cable from your computer to one of the LAN <-> ports on the TC to help configure it. You can leave the ethernet cable connected if you want to back up using ethernet (recommended for the first backup since it will be much quicker than wireless) and disconnect it if you want back up later using wireless.

    Open AirPort Utility and click Continue to follow the guided setup procedure. When you get to the page about how to connect, you want to choose the option to "connect using ethernet to extend the network or create a second network."

    Post back on your progress.

  4. 0

    sharonvaughters

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hello
    We used a different guide and it works but it is reporting a problem called double NAT.

  5. 0

    sharonvaughters

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hello we did what you said and now airport utility cannot find our time capsule.

  6. 0

    Bob Timmons

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The double NAT error indicates that a setting needs to be adjusted.

    Can you restart both your computer and the Time Capsule (pull the power cord for a moment and then plug the power cord back in) to see if you can "see" the Time Capsule using AirPort Utility?

  7. 0

    Bob Timmons

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    When AirPort Utility can "see" the Time Capsule again, this time click Manual Setup.

    Click the Internet icon in the row of icons

    Look for the Connection Sharing setting at the bottom of the page

    This should be set to "Off (Bridge Mode)"

    Click Update to restart the Time Capsule and you should get a green light in 20-25 seconds.

  8. 0

    sharonvaughters

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I thought the 2wire was supposed to be in bridge mode not the time capsule

  9. 0

    sharonvaughters

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    We powered them both off but westill can't find the time capsule

  10. 0

    Bob Timmons

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The 2Wire is/was probably setup to be your main router by your ISP. Any router (Time Capsule is a router) that you add to the network must be configured in bridge mode.

    You may need to hold in the reset button 10 seconds on the Time Capsule and reconfigure it again.

  11. 0

    sharonvaughters

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    We can find the time capsule but we can't connect to the network it creates wireless ly

  12. 0

    Bob Timmons

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Click the AirPort icon at the top of your screen and look for the name of the network that you created for the Time Capsule. If you don't see it, click Join Other Network to see if it appears.

  13. 0

    sharonvaughters

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    We cannot find the network, what settings should we be using on the time capsule

  14. 0

    sharonvaughters

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    It says create a wireless network instead connect to another network using Ethernet like we chose. Should we be using pppoe insttead of Ethernet? On the 2wire router should we be using bridge mode?