Benches Networking

4

Connecting Time Capsule to PS3 Slim

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

We are having a heck of a time getting our new PS3 Slim to work with our TimeCapsule (wireless internet connection). The PS3 sees the Time Capsule, but the PS3 queries against the Time Capsule and then times out before it ever gets an IP address from the Time Capsule. We have WPA2 incryption. So we looked on Google, and someone said we needed to convert the password to a hexidecimal string (which we did using Airport Utility). When we got this string, it was all cap letters and numbers. When we entered it, the PS3 told us the format was wrong, which we assume is because it needs a lowercase letter, which the Aiport Utility did not give us.

We have other computers using our network, so we know connectivity is not the problem. We can't seem to get the PS3 to talk to Aiport.

Anyone had this problem and have a solution? Do we need to change to WEP? Do we need to change the Time Capsule password to a numeric string? We are at a loss.

Thanks.

4 replies

Sign in or join Beachball Help to reply.

  1. 0

    mako812

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hello,

    Any luck with this? I'm having the same problem.

    thanks - mm

  2. 0

    mvial

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hello there,

    I've been having the same problem as you guys... there's NO WAY I can get my PS3 Slim to connect to my TC.

    Cheers,

    M.

  3. 0

    Bob Timmons

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If this is the correct Specification Sheet for the device, the product will only handle 802.11 b/g connections. That indicates that WEP is likely to be the type of security that this device would support. It might handle WPA, but not WPA2.

  4. 0

    Pongify

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    We have our PS3 connected wirelessly to our Time Capsule > ADSL Modem > Internet, first I used the Easy option to configure the PS3 then once I had a connection went back and Customised the settings.

    One thing to make sure of is the *WAP2-PSK (AES)* Key make sure you enter it correctly as mistaking a capitol
    I - i for a lowercase
    l -L will mess everything up.

    *PS3 Network Settings*

    *Internet Connection:* Enabled

    *Connection Method:* Wireless

    *Signal Strength:* 90%

    SSID:
    *****

    BSSID:
    *****

    Channel: 1

    Security: WPA2-PSK (AES)

    *WPA Key:*
    *****

    *Address Settings:* Automatic

    *IP Address:*
    ***** (I set my Time Capsule to reserve this IP Address for my PS3)

    Subnet: 255:255:255:0

    *Default Router:* (This shows my Time Capsule IP Address)

    *Primary DNS:* 212.159.6.10

    *Secondary DNS:* 212.159.6.9

    MAC:
    *****

    MTU: Automatic

    *Proxy Server:* Do Not Use

    UPnP: Not Available (I set to enable when going through the setup process)

    NAT: Type 2

    Another thing to note after you have successfully got your connection running is the
    DNS addresses. I did have ours set to
    Automatic which was then using the Time Capsule, however going onto VidZone I could not get videos to play, Playstation Home was fine. So I went back into the settings and changed the +Primary and Secondary DNS+ addresses to the ones my ISP states on their website. After this all the videos in VidZone run like a dream.

    Hope this helps some people.