Benches Networking

3

Xbox IP conflict

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Here's my existing setup pre-xbox 360:

ATT DSL Modem >> Airport Express >> wireless to iMac, iPod touch and Wii (only 3 items on the network)

No problems. Have worked great for over a year. Enter the xbox 360... (Instead of buying the $100 xbox wifi adapter, I opted to use a D-link 10/100 switch I already had, and ran a cable)

ATT DSL Modem >> D-Link 10/100 Switch >>
(Port 1) WAN from modem
(Port 2) Out to Airport Express and wifi
(Port 3) Wired connection to xbox 360

At this point I expected to continue using DHCP with everything, including the xbox, and things would just work. But the xbox reports an IP conflict, which best as I can tell is the Airport Express. Any devices behind the Airport have local addresses (192.168...), but the Airport itself was set to DHCP and more closely resembled my dynamic IP from ATT. It will not pass on an internet connection apart from this setup using DHCP.

Obviously there's something I don't understand going on here...can anybody enlighten me what might be up? Otherwise am I right to assume I should have just bought the wifi adapter? Should've known Microsoft would try and stick it to me... Thanks in advance for your help.

3 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Unfortunately your setup will not work.

    The AirPort Express (AX) does not provide DHCP support out it's Ethernet port therefore it can not create a local IP address for your Xbox 360.

    You need to replace the D-Link switch with an inexpensive router. The router will properly provide DHCP services to the Xbox 360. The AX should then be configured to act as a bridge (not sharing a single IP address).

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Well I thought my DSL modem used DHCP, for example when I had it hooked directly to my iMac, the iMac would be set to DHCP and received an IP just fine. However, where the modem has only one port, I assume it only wants to serve out one address, and when I have the AX and the Xbox plugged into the switch and into the modem, the two are fighting for the same address? Thanks very much for your response.

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Your ISP uses DHCP to give you your one public IP address.

    If you want to connect multiple devices you need to use a router which can use that one public IP address and then create multiple local IP addresses. An Ethernet switch can not do that.