Benches Networking

14

Airport Extreme & DirecTV HD DVR Receiver

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I was wondering if I would be able to use my Airport Extreme Base Station with the DirecTV Receiver to access On Demand content from DirecTV. I just purchased and have setup Time Capsule as my main network router, replacing the Airport Extreme. Here is what Id like to do if possible.

-Keep the Time Capsule setup as is wired into my 24" iMac and used wirelessly for my MacBook Pro.

-Move the Airport Extreme Base Station into the living room, hook up to the Satellite receiver via ethernet and be able to watch On Demand content wirelessly.

Is this doable and if so how? Any help would be appreciated. Thanks

14 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    A great concept but I don't think it doable.
    need ethernet port activated
    need a program to interface
    don't think you can transfer the on demand especially if it is copy once or copy never maybe if copy freely but that is going by the wayside fast.

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I think you may have misunderstood what I was thinking..let me know if you did..

    I want to watch the on demand content on the TV not wirelessly on my macs. I was able to hook up the Airport Extreme as an extension to my network but on the DirecTV side of it their software says I was connected to the network but not to the Internet. I went into the advanced settings but some of the info needed to be manually entered. This was Default Gateway and DNS. Also would I have to add the Receiver as a client onto the network? Thanks

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Jeremy,

    I was successfully able to do this with my AE and DTV HD DVR. In the network setup on the DVR choose Advanced Setup, I changed left all the settings to their defaults except the DNS setting. I chose 208.67.222.222 and then Connect Now and got a "Congratulations! Your receiver is now connected to DIRECTV via the internet" message.

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    When I go in my advance settings on my DVR only the 1st 2 have numbers in them. The DNS and Gateway fields are empty. It will not allow me to connect until both these fields are entered.

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    That sounds correct, what I have in mine are:

    IP Address: 10.0.0.199
    Subnet Mask: 255.255.255.0
    Default Gateway: 10.0.1.1
    DNS: 208.67.222.222

  6. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Do you also have another router as your main network? I am using the Time Capsule wired into my iMac as my main router but will be using the Airport Extreme to extend the network.

    The Gateway numbers you have given match what I have but will the DNS numbers be different and if so which router should I take them from to input into the DVR settings?

    Sorry for the confusion

  7. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I use my AE as my primary router, I also have an Airport Express that I use for streaming iTunes music from my iMac to my home theater however that is irrelevant for this discussion.

    On your Time Capsule you might want to check the DNS settings on it by going to *System Preferences-Network-Advanced-DNS* then adding the DNS setting I gave you as well as 208.67.220.220.

    Once that is done go back to your PVR and try the settings I provided.

  8. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Ok not having any success here. I did a couple things with the settings you provided.

    1. I left my IP and Subnet Mask numbers to what they defaulted to. I entered the Gateway and DNS numbers you provided. I tried to connect and am getting exclamation points inside a triangle type logo after the IP and Gateway fields. This is telling me most likely the info is not correct.

    2. I then tried putting in all the numbers you provided (all 4 fields) and this seemed to work as it gave me all Ok's when doing the test. But then as it tried to connect to the internet it came back with an Error 22.

  9. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Well I'm stumped. Is it possible for you to connect the DVR directly to your TM instead of the AE?

  10. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    No as the time capsule is in my computer room where the cable modem is and connected directly to the iMac.

  11. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You might want to call DTV and ask them, you will need to be patient until you can find someone that knows networking. If your AE is still under warranty try calling Apple tomorrow and see if they know how to do this.

    I just tried connecting my DVR to my Airport Express and this time it failed so I'm thinking maybe it isn't possible. Another thought it swapping the TM and AE and see if you can get it to work.

  12. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Ok this is where Im at... I put the following info into the advance settings on my DVR

    IP 10.0.1.194
    Subnet 255.255.255.0
    Gateway 10.0.1.1
    DNS 208.67.222.222 or 208.67.220.220

    I try and connect and it says everything is ok as far as the numbers and also states I am connected to the Network..but then in the Connected to Internet it says failed and comes back with the Error 22 Code. Is there something I need to change on the routers, mac etc that might need opened up to allow the DVR internet access?

  13. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    There might be but I just don't know what settings to tell you to change.

  14. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I am getting OK on all the settings in Advanced settings but the then it gives me the "Ethernet Cable Not Connected" I checked the cable and it is fine.

    Any ideas?