Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello all. I put an Airport Extreme card in my G5 - everything I've read so far says there is an antenna, am I meant to connect this antenna to the card or is it hard wired back to the expansion port ???
Secondly, last night after installation I didn't get any bars on the Airport status indicator. I check my Macbook in another room and it had full bars and was connected ok to my wireless router. This morning when I checked the G5, it had full bars but said it was not connected. I went through the diags and it says it couldn't connect to the wireless network I specified. It doesn't even bring up a list of available networks that it has found.
I put the serial number of the Airport Extreme card on here to search to see what Apple's site thinks I have - it comes up as an Airport Base Station - which the card is not. I also searched for its model number (M8881Z/A) but that didn't return any results. I am aware that I need the correct Airport Extrem card for my model G5 so I was trying to check to see if I have the correct one. Would I be correct in assuming that if the Airport card comes up in About This Mac and indeed, the Network config - that the card is installed and working ok ???
Not sure what to do to be honest, any thoughts appreciated.
Imported from the Apple Support Forums via the Wayback Machine 🔗
If you have the Power Mac G5 compatible with the
AirPort Extreme card, it has an internal antenna wire which must be attached to the card. Your Power Mac G5 also has an external AirPort antenna which must be attached to the back of the Power Mac G5.
0
theHotHead·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Interesting reply !!!
I checked my G5 - its down as being a Late 2005 model, 2.0 dual. My Airport Extreme looks the same as that in the link you posted but my G5 does NOT have a connector for the external attachment that the diagram shows. It has the standard connectors for Firewire, USB, digital audio etc but nothing for the Airport.
Also, inside the G5, I have 2 thin black wires, one of which I thought I would need to connect to the Airport Extreme card, but it does not fit the connector on the card. Either a piece is missing on the (the connectors on the cable) or the cables I can see are NOT for the Airport card. To be honest I am pretty sure they are the right cables though cos I checked a non Intel G5 at my office today and, although it had a single fatter cable, the connector on it looked like it would fit on my Airport Extreme - so it begs the questions, what has happened to the connector(s) on these 2 thin black cables and what should I do next ??
Thanks
Kevin
0
theHotHead·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I just found out - for my model G5 - I need to order a special part from Apple - so the Airport Extreme card I bought is not suitable !
Great, I wish the shop listened to me when I told them what G5 I had !!!
0
William Day1·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Kevin, I am having the same problem trying to install an airport extreme card. I have the double wire antenna which doesn't fit the extreme card that comes with the kit specified by my serial number. What was the special part you had to order? ANY PART NUMBER OR INFO WOULD BE GREAT. THANKS