Slow Transfer Speeds
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hey guys,
My cousin, bought a new iMac 21.5" yesterday, and he wanted about 30 gigs worth, of our Logic songs that we have done. So I created a wireless network on my iMac (mid 2007), and set up file sharing in the preferences. When my cousin connected to my computer and wanted to transfer the projects it said it was gonna take 5 hours.
Why so slow?
Now I have a new MacBook, and done the same thing to my iMac, and have noticed the same thing, when I wanted to use Migration Assistant.
Anyway to help me speed up my wireless connection.
10 replies
Sign in or join Beachball Help to reply.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
First of all the time stated is just an estimate. However, transferring via wireless can be influenced by many factors but will almost always be slower than using a direct connection to the other Mac or an external hard drive.
You can also make a direct connect Ethernet connection and transfer the files directly.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
compleidiot23 wrote:
Anyway to help me speed up my wireless connection.If both Macs have firewire ports, then us [firewire target disk mode|http://support.apple.com/kb/HT1661].
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
hey guys,
Thanks for the help, but it was kinda constantly sitting on about 3 hours. In the end I had to cancel it.
Is wifi connections between 2 computers generally that slow?
'Cos now I have a new macbook, and when I wifi it up to my imac its, kinda feels like the same speed.
thanks for the help
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
It all depends on what the protocol is that is used between the Wi-Fi enabled Macs, and your router.
Say, for example, you had a "perfect" 802.11g connection.
That's 54 Mbps, or 6 megabytes/second theoretical.
First you need to reduce that by about 20% for overhead and other housekeeping.
That's 4.8 megabytes/second, or around 17 GB/hour.
So transferring 30 GB would take a bit less than two hours in an ideal 802.11g situation.
Now if you connected a Cat 6 ethernet cable between your two Macs, you should both have gigabit Ethernet, so you should be able to use the wired connection to transfer the 30 GB of data in about six minutes or so.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
For some somewhat comparable data, [see this thread|http://discussions.apple.com/thread.jspa?messageID=10702515�]. For some comparability with your results, I made this very crude calculation using the average of the seconds to transfer from my results in 1 and 2.
{((38 + 28) / 2) X (30 GB / 1.1 GB)} / 60 (seconds in a minute) = 15 minutes. In other words, it would have taken me about 15 minutes to transfer your data. I leave it to William to estimate the time it would have taken me on an N wireless network. Regardless, it does seem like the projected transfer time you had is pretty slow.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Don't forget that if possible Apple likes to underpromise and overdeliver.
If a transfer the Mac says will take three hours takes two, people are happy.
If a transfer the Mac says will take two hours take three, people get upset and call Mac OS X a piece of junk.
It's all about managing expectations (seriously.)
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Absolutely true. For example, BMW does the same sort of thing.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I didn't realise transfering stuff over wifi, was that slow. Fair enough a few megabytes is fine, but anything larger than 5 gig, takes a while. In the end, between my cousins and mine iMac's could use firewire, but I don't have a firewire to firewire cable. So I'm gonna have to use the cat6 cable I have. Same with my MacBook, 'cos that doesn't have firewire.
Cheers guys
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The cat 6 cable really will be fastest in the absence of FireWire.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
compleidiot23 wrote:
When my cousin connected to my computer and wanted to transfer the projects it said it was gonna take 5 hours.
Why so slow?
Anyway to help me speed up my wireless connection.
I did a transfer today of a 1.1 GB file from my HP N Laptop to my MBP N Laptop. It took 720 seconds. To transfer the same about of data you mentioned (30 GB), thus, would take about:
720 sec X (30 / 1.1) = 19,636 sec or about 5.5 hours.
So, if your transfer actually would have finished in about 5 hours, then I'd say your wireless is about like mine, which I view as being pretty fast, whether or not both of your machines are running N. I am sure you iMac is, but am not sure about the other machine.