File Sharing with AirPort or Ethernet - Both co...
Imported from the Apple Support Forums via the Wayback Machine 🔗
Here's the scenario. Two Macs are connected using AirPort to the local wireless network, with an AirPort Extreme Base Station as the router. The two Macs are also connected directly, to each other, using an Ethernet cable.
One Mac is set up to do +File Sharing+ (to be the file server). On the (other) "client" Mac, I want to connect to the "file server" Mac using the direct Ethernet connection (because it is much faster than even 802.11n wireless). For all other networking, including Internet access, I want both Macs to use the AirPort connection. Use Ethernet connection only for file sharing between the two Macs.
*Is there some way to force file sharing to use the Ethernet connection* (not AirPort), when both are available and connected?
I don't want to be too long-winded about what I have tried, but here is want I have observed. If I go to System Preferences Network pane and +Set Service Order+ (under the gear icon) so that AirPort appears first, both Internet access and file sharing use AirPort. If I set it so that Ethernet appears first in the sidebar, file sharing uses Ethernet and Internet access does not work (unless I also enable +Internet Sharing+ on file server Mac). If I switch the service order back to AirPort being first, Internet access goes back to using AirPort, but if I leave the file sharing over Ethernet connected, it continues to work over Ethernet (sometimes); it does not seem consistent. Sometimes it cuts off. Other times, the Internet access over AirPort become problematic.
Secondary question - *Is there some place I can look to see which connection is being used* at a particular moment, for file sharing?
The way I checked was by transferring a large folder and noting the estimated transfer time. A few hours is from AirPort being used; 20-30 minutes is Ethernet being used.
If it matters, the +file server+ Mac is a Power Mac G5 with Leopard and the client Mac is a Mac mini with Snow Leopard. I can make it happen, but the process is convoluted and it does not seem to work reliably or consistently, with either the file sharing or Internet access connection becoming inaccessible until I restart. I am willing to accept +UNIX command line magic+ as a solution; it just has to be a method that works consistently, and is understandable.
5 replies
Sign in or join Beachball Help to reply.
- 0
- 0
- 0
- 0
- 0