Benches Networking

8

Extreme & Express Best Configuration

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have an existing Wireless Network with an ADSL modem plugged into an Airport Express. The Airport Express was originally setup with the Create Network option. I have just bought an Airport Extreme and added it to the existing network by simply using the Extend This Network option. So now I have a working wireless network with the Express as the main source of the signal and the extreme extending it, is this likely to cause any problems? Or should I swap it over so that the extreme is 'crating the network' and the express 'extending it?'

It is just that using the express as the link to the ASDL modem is more convenient due to the location of the nearest telephone socket and the surroundings.

I am in the UK

Interested in what people think, thanks.

Chris

8 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Welcome to the discussions, chadders!

    Although one would normally use the full featured router as the base station and the Express as the remote, there is nothing wrong with your current setup as long as you intend to use wireless to connect your devices to your network.

    In it's current configuration, your Extreme is performing the same function as if you had added an AirPort Express.

    If you have a new "dual band" AirPort Extreme, you won't be able to make use of the "guest" network feature using your current configuration.

    If you do want to use the "dual band" features of the Extreme, it will need to be reconfigured as your main base station. If you did this, you would also have the availability of the 3 ports on the Extreme for ethernet devices and you could attach a USB drive to the Extreme to store additional data or attach a compatible printer. The Express would then be reconfigured to "extend a wireless network", assuming you have an Express(n).

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks, your clarification is very useful. I am aware of the limitations of the current set up and I am happy to live with them. I was just wanting to make sure there would be no 'detrimental' affect as far as signal was concerned.

    It seems to work fine...

    Again. Thank you.

    c.

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm having exact the same setup (the extreme is in the living room, connected on it is a Naimuniti and I NAS and the express is in the home office with the modem and a printer connected to).
    I try to join the extreme to the network created with the express, but whenever I try to extend the network with the extreme, there is an error message, that it's impossible to extend this network.

    What am I doing wrong?
    Any help appreciated

    Gaudenz

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Although there may be an option shown to allow the AirPort Extreme to "Join" the wireless network created by the AirPort Express, this setting is not active, so it's not possible to have the Extreme "Join" the wireless network created by your AirPort Express.

    For the "Extend a wireless network feature to work correctly", both your Express and Extreme must be "n" devices. Older "b/g" devices cannot be configured for this function.

    If both your devices are "n", and you need some help with the "Extend" configuration, please post back. There is a good step by step discussion of this feature in Apple's Designing AirPort Networks guide. Reference pages 43-44.

    http://manuals.info.apple.com/enUS/Apple_AirPort_NetworksEarly2009.pdf

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Bob

    thanks for your quick and clear answer. This was my suspicion, but I didn't find the answer. So I will have to buy a new Airport Express

    Thanks again

    Gaudenz

  6. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks Chadders. This answered the question I had been looking for. I have an Express(n) set up and am now waiting for a new Extreme(n) to replace the Express. Do I need to delete/change anything before I set up my Extreme or can I just unplug the Express and change it over to the Extreme?

  7. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You can unplug the Express and begin the configuration of the Extreme. If you intend to reconfigure the Express for another function, it's usually wise to perform a Factory Default Reset before you try to reconfigure it.

    Pull the power on the Express
    Hold in the reset button and keep holding it in as you plug the Express back in to power
    Release the reset button after approximately 10 seconds

  8. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks Bob! I had been surfing forums everywhere to find an answer. I should have started here.