Benches Networking

4

Complex Network Setup (to me anyway) Ques…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I apologize this is very long, but I didn't know how else to describe a fairly complex setup to enable someone to better help me!

I have a cable modem in a tech closet, with the entire house Cat-5 wired, however only a few rooms are currently active. I have "patched" the network together to disrupt my wife and her office as little as possible so far. I have a Netgear (g, boooo) router hooked up to the cable modem, with 3 ethernet cables attached, and a wireless network (network number 1, g speed).

In my office, I have an Airport Extreme, which is creating a second wireless network (network number 2, n speed). The ethernet connection in my office goes into a Workgroup Switch, with ethernet out to my desktop and ethernet out to the Airport Extreme. In my office, in addition to the desktop I have two laptops, which are both connecting wirelessly to the AE. [Sidebar: I am assuming that since my AE wireless-n router is not at the front of this entire chain, that I am seriously degradating the n performance I am getting?? My laptops show they are generally connecting at 130 Mpbs. If properly setup, my wireless network speeds should be closer to 300 Mpbs, correct?]

In my wife's office downstairs, her desktop is connected using ethernet. She has the primary ITunes library, with over 600GB of movies and music on an external hard drive. We also have an Airport Express plugged in to extend the wireless network from the AE upstairs.

In the family room, we have Apple TV (love it!), which is connecting to the Apple wireless network.

Ultimately, I want to (1) get the Netgear g router out of the equation, (2) upgrade the entire network to gigabit ethernet and wireless-n speeds to maximize all throughputs, (3) simplify any of the setup where possible, (4) have more of the rooms of the house activated via the ethernet capabilities due to whole-house wiring [what is best to insert between AE and the cable modem connection due to AE only having 3 outbound ethernet connections, without degrading performance?]

Any insights and guidance on this would be greatly appreciated
User uploaded file

4 replies

Sign in or join Beachball Help to reply.

  1. 0

    speakerfritz

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm going to make some assumptions, then a recommendation.

    I'm assuming you have an ethernet cable running from your wire closet to your office, we will call that wire X. You have a switch in the wire closet with at least 4 wired ports going to other rooms, those we will call wires Y1, Y2, Y3, Y4.

    a) To satisfy your requirements fully, and specifically the ease of use and apple transparency, I would buy a second extreme base station. Connect the 1st base station to your WAN cannection. Connect Y1, y2, y3 into that base station.

    b) I would put the second base station in your office. setup to extend a wireless network. plug your machine into one of the ethernet ports. take wire X and plug it into one of the other ports. go back down stairs and connect wire X to wire Y4 using an ehternet female to female connector.

    This will give you total apple transparency. you will be able to connect wirelessly to the apple network. You will have 4 rooms wired directly into apple extreme base station ports. Your will have 2 ports left over. You will have a USB port in your office that you can share a printer or a drive on.

    I would stay away from using non apple switches and hubs since they add complexity with apple transparency.

  2. 0

    jenks.alan

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I forgot to add another goal out of this entire mess is how best to utilize the Apple products and network(s) to be able to see all computers, share files, printers, external hard drives, Apple TV, etc?

  3. 0

    speakerfritz

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm going to make some assumptions, then a recommendation.

    I'm assuming you have an ethernet cable running from your wire closet to your office, we will call that wire X. You have a switch in the wire closet with at least 4 wired ports going to other rooms, those we will call wires Y1, Y2, Y3, Y4.

    a) To satisfy your requirements fully, and specifically the ease of use and apple transparency, I would buy a second extreme base station. Connect the 1st base station to your WAN cannection. Connect Y1, y2, y3 into that base station.

    b) I would put the second base station in your office. setup to extend a wireless network. plug your machine into one of the ethernet ports. take wire X and plug it into one of the other ports. go back down stairs and connect wire X to wire Y4 using an ehternet female to female connector.

    This will give you total apple transparency. you will be able to connect wirelessly to the apple network. You will have 4 rooms wired directly into apple extreme base station ports. Your will have 2 ports left over. You will have a USB port in your office that you can share a printer or a drive on.

    I would stay away from using non apple switches and hubs since they add complexity with apple transparency.

  4. 0

    jenks.alan

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thank you. I will take a look at that and circle back. I was starting to guess another Airport Express might be in my future. 🙂