Time Capsule and Netgear 834GT setup
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Am in advanced consideration ⚠ of getting a Time Capsule and large USB HD for backup/storage purposes and have a question about using it in conjunction with my existing Netgear 834GT.
Due to the fact that I am running a hacked firmware on the Netgear I have easy access to all the advanced features regarding using the router as an ADSL modem. I understand that the Time Capsule easily connects to most modems for broadband access but if the Time Capsule is supplying DHCP (?) IPs for all the kit on my network, how would I access my (Netgear) router setup if it is no longer the default IP ie 192.168.0.1.
Does that make sense? Regards
14 replies
Sign in or join Beachball Help to reply.
- 0
Tesserax ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
That URL is the alternative that Netgear provides to 192.168.0.1 to access their router's administration page.
- 0
Tesserax ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I apologize. I must have downloaded the reference manual for the wrong router model. After downloading the one for the DG834GT 108 Mbps Super Wireless ADSL Router, there was no option for an alternative login page. http://192.168.0.1 would be the default as this is router's default LAN-side address ... and what you would still use if you connected your computer directly to it.
- 0
Tesserax ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Since you will effectively have two routers in your network configuration, how they're configured will depend on your requirements. However, some basics would apply. For example, the "upstream" router, the one directly connected to the ADSL modem, should be the router configured for both NAT & DHCP services for the entire network. The "downstream" router, the one connected to the first router should be configured as a bridge to "pass through" the upstream routers NAT & DHCP functions.
So, with your equipment, one configuration would have the Netgear router perform as the upstream router and the Time Capsule (TC) would be the downstream one that would reconfigured as a bridge.
- 0
Stu Sumner ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
From what I can tell by looking at the Nethear firmware I have 2 config options, 1 as a router and 1 as a modem, so would that mean that I wouldn't have the issues you mention?
- 0
Tesserax ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The option you will want to look for would have something like Wireless Distribution System, WDS, extend wireless network, etc. The two you mentioned would be the basic options of, whether or not, the Netgear performs as a router or a modem. Again, even if the Netgear supports WDS, it may not be WDS-compatible with the TC.
- 0
Stu Sumner ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Sorry, I thought the whole point of the time capsule was that you can connect an adsl modem to it to provide your broadband. That's what I want to do. I just don't want to shell out for a modem as I already have one that just needs configuring as such. All I need to know is whether I would be making that router's setup page (192.168.0.1) inaccessible if I configured it that way
- 0
Tesserax ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I thought the whole point of the time capsule was that you can connect an adsl modem to it to provide your broadband.
Yes, that is correct and I apologize if I mislead you. One important note: The TC will not support PPPoA credentials, only PPPoE. Of course, this is only an issue if your ADSL ISP requires this for connectivity to their service.
All I need to know is whether I would be making that router's setup page (192.168.0.1) inaccessible if I configured it that way
Your Netgear router can be accessed at
http://routerlogin.net, regardless of its LAN IP address so that should be an issue. - 0
Stu Sumner ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
PPPoE's no problem as AOL in the UK have all their servers using that protocol. What, however, is http://routerlogin.net ??
- 0
Tesserax ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
That URL is the alternative that Netgear provides to 192.168.0.1 to access their router's administration page.
- 0
Stu Sumner ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
http://routerlogin.net just defaults to a Netgear support page, it doesn't give me the same login page as 192.168.0.1
- 0
Tesserax ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I apologize. I must have downloaded the reference manual for the wrong router model. After downloading the one for the DG834GT 108 Mbps Super Wireless ADSL Router, there was no option for an alternative login page. http://192.168.0.1 would be the default as this is router's default LAN-side address ... and what you would still use if you connected your computer directly to it.
- 0
Stu Sumner ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Cheers for that. So it wouldn't matter what IPs the Time Capsule dished out to other devices, even if they weren't in the 192.168.0 range the 834 would still respond to 192.168.0.1
- 0
Tesserax ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
That's basically correct. However, you can change both the TC's DHCP-provided IP addresses and Netgear's LAN-side IP address to be in the same range. The reason to do so is that both routers would be in the same subnet allowing clients connected to either to be able to share files.
- 0
Stu Sumner ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Cheers mate, thanks for your help and advice, now for the practical application 🙂