Benches Networking

7

How to extend Netgear-based network?

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have a home network in which a cable modem is wired to a Netgear WGS614 v.6 wireless router (802.11g). My wife's Dell desktop sits beside the router and is wired to it; the Dell has no wireless adapter. We have three Powerbooks in the household that connect wirelessly: two Tibooks with pretty good range and my son's Albook, which has always had pitiful range. The network is only used to share an Internet connection among the four computers — there's no file sharing, printer sharing, etc. going on.

Some time ago my son bought an early AX in hopes of using it to extend the wireless network so he'd be able to connect wirelessly to the network and the Internet from his room. He couldn't figure out how to do it and gave up. Today he asked me to revive the effort, and I can't get anywhere with it myself. I understand almost nothing about networking and am very leery of screwing up what has been working fine so far, except that my son has to use his Powerbook in the living room, near the router.

I'm using my Tibook running OSX 10.3.9. I plug in the AX and open the Airport Setup Assistant. I'm connected to the Internet through the Netgear base station. I click Continue in the first ASA screen. In the second screen, I select "Change settings on an existing Airport Base Station" and click Continue. The third screen says ASA has found an Airport Base Station with a wireless network named {the name of my wireless network}. I skip the "Scan Again" button and click Continue.

Nothing happens. No next screen appears. I'm stuck.

If I click "Scan Again", I get a screen with a drop-down "Available Airport Networks" menu that includes my home network's name and "Apple Network e2e281", which is apparently the AX. If I select the latter and click Continue, the next screen shows the base station with its number and Aiport ID, already selected. Clicking Continue in that screen shows me the settings with which the AX is configured. It appears to me that I'm being asked to configure a new network based on the AX, which isn't what I want to do — I want to extend my existing network instead.

Am I doing something wrong, or is my non-Apple router the problem?

7 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The third screen says ASA has found an Airport Base Station with a wireless network named {the name of my wireless network}. I skip the "Scan Again" button and click Continue.

    Nothing happens. No next screen appears. I'm stuck.

    I'm surprised the Setup Assistant calls it an "AirPort base station," but it's trying to manage your Netgear, which it can't do. That's the problem here.

    If I click "Scan Again"...It appears to me that I'm being asked to configure a new network based on the AX

    Right.

    which isn't what I want to do — I want to extend my existing network instead.

    Judging from what I've seen in numerous threads, plus a quick search I just did, your chances of getting this to work with a Netgear WGS614/AirPort combination are slim. Apparently, few non-AirPort products are compatible with Apple's WDS implementation.

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm surprised the Setup Assistant calls it an "AirPort base station," but it's trying to manage your Netgear, which it can't do. That's the problem here.

    On second thought, it sounds like it is finding the AX via the Netgear, so I don't know what's going wrong in this case.

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I believe the Netgear WGR614v6 will require a DD-WRT firmware upgrade in order to support WDS. v8 + v9 of this model supports WDS natively.

    You may also want to take a look at this macoshints forum post: AEBS and Netgear WGR614

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi, Dave, and thanks for your thoughts. I think the Netgear router and the AX were being seen as separate base stations, because they had different network names in the Setup Assistant — that is, I don't think the AX was being accessed through the Netgear router, but was being seen as independent. But it still seems you must be right in concluding that the Netgear isn't compatible with the WDS implementation the AX wants to use. I had surmised that that would be a problem, but I was hopeful that my router might prove to be one of the few that work. No such luck, I guess.

    I ran a wired connection to my son's room a while back to make up for the lack of wireless access there, and I think he'll just have to live with that until he gets a new computer with better wireless range or a place of his own. It really isn't practicable to move the router significantly closer to his room.

    If anyone has other ideas about this, I'm all ears.

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Glad I was of some help.

    Tesserax wrote:
    I believe the Netgear WGR614v6...

    But he has a WGS. My response was based, in part, on your contributions to a recent thread re. a Netgear WGR614 (http://discussions.apple.com/thread.jspa?messageID=8231779&#8231779) and the fact that I didn't find a DD-WRT firmware upgrade for the WGS. Do you think the procedure described in the macoshints thread you mentioned might work, nonetheless?

  6. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Try as I might I could not locate a WGS614 model on Netgear's site. Albeit I only tried looking in the US & UK sites ... so I'm guessing that the OP meant WGR614. I apologize if I misunderstood and have caused any confusion.

  7. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The most recent ref I was able to find to a new one via Google, Froogle, etc. was dated 2006, so I concluded it's discontinued.