Time Capsule VERY slow ethernet back-up o…
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi anyone who can help....I'm getting really frustrated with Time machine
It seems quite afew people are experiencing problems with TC....
BUT they all seem to have different issues. Mine is simple.
As a wireless network it works just fine, last weekend i had some friends over and we had 4 laptops going at once - speed was fine
Backing up - My G4 powerbook works FLAWLESSLY, backing up wirelessly.
BUT...My G4 iMac (connected directly via ethernet cable) hasn't been able to do a back-up since got it. It gets stuck on preparing or takes day's (Yep DAY's) to do a few 100 MB.....
Obvoiusly the TC is working, but not the wired connection. I can't try my iMac wirelessly, as it doesn't have an airport card
ANY suggestions? Oh and I don't have any virus software installed
7 replies
Sign in or join Beachball Help to reply.
- 0
Glenn Carter ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Andrew,
*_Slow Time Capsule Transfer Via Ethernet_*
*Disable Anti-Virus Software*
“Using virus scanning software can make Time Machine backups very slow. If you use Norton Antivirus 10 AutoProtect or a similar product, try turning it off during backups.” [http://docs.info.apple.com/article.html?path=Mac/10.5/en/15140.html]*Create An “Ethernet Only” Location*
While you are physically connected to the Time Capsule via ethernet you may still be experiencing slow data transfer speeds because your Airport network is still active and taking priority.Connect one end of a Cat-5 Ethernet cable into one of the LAN ports of the TC (<•••>) NOT to the WAN port (wheel icon). Connect the other end to your Macs ethernet port.
Next, go to System Prefs --> Network.
At the top of the window note what “Location” you are currently using, as you will need to return to this setting later.
Now, change “Location” to “Edit Locations”.
Click the “+” button and create a new location named “Ethernet Only”.
Click “Done”.
In the Services Pane on the left, eliminate all other services using the “-” button leaving “Ethernet” only. If you choose to leave other services listed then al the very least move Ethernet to the top of the list using the Action Menu (gear button) at the bottom and "Set Service Order".
Verify that “Configure” says “Using DHCP”.
Click "Apply" in the lower right.
You should be seeing an assigned IP Address and the Status should say “Connected”. The dot beside “Ethernet” should be green.
Now begin your backup or transfer of files.
You should still have internet access during this period.Once the backup/transfer is complete, remember to change the Network Prefs “Location” back to “Automatic”, or whatever setting it had originally been, to restore Airport connectivity.
*Adjust Ethernet Speed*
Open Network Preferences.
With Built-in Ethernet selected on the left, click "Advanced" in the lower right.
Click "Ethernet" tab on the far right.
What is selected beside "Speed"?
Try changing this setting and see if it makes a difference.Next launch Airport Utility.
Select the Time Capsule on the left.
Click “Manual Setup”.
Select “Internet” from the toolbar.
Click “Internet Connection” tab.
Near the bottom verify that “Ethernet WAN Port” is not set to a slower speed. Either choose “Automatic” or the fasted speed available.
If you have made any changes, click “Update”.
*Slow Full Backup After Restore*
Try either deleting the “old” backup disk image or copying it to another disk. Then start the “new” full backup again. Some users have experienced improved speed when the “old” disk image was removed from the backup disk.Let us know if this was helpful.
Cheers!
- 0
BigBoeing ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Glenn,
Thanks very much for your post above on slow Time Capsule backups. I've been having the same problem conducting my first full backup. I'm trying the Cat 5 ethernet cable option right now, although I simply turned of my iMac Intel Core 2 Duo's Airport vice creating an Ethernet Only location as you suggested above. Although still slow, it seems to be going faster than when I tried a full backup using the wireless mode.
Question for you: Does turning off the computer's Airport accomplish the same thing as your suggestion to create an "Ethernet Only" location, or did I miss the boat on something?
Could you please explain?
Thank You,
Jim - 0
trilobyte ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Try replacing your ethernet cable. You need CAT6 (not CAT5) to get gigabit ethernet speeds, with the cable you're using I'd be surprised if you're getting 1/10th the performance that Time Capsule and your machine are capable of.
- 0
Glenn Carter ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Question for you: Does turning off the computer's Airport accomplish the same thing as your suggestion to create an "Ethernet Only" location, or did I miss the boat on something?
Most of the time simply turning OFF Airport would do. However, you never know how other users have configured/messed with the Networks Prefs other Services. Rather than suggest turning Airport OFF, I find it expeditious to simply explain how to set up "Ethernet Only". This prevents multiple posts back and forth trying to troubleshoot network issues when they could be backing up right now.
Then when they are done, they simply switch "Location" back to the previous setting. No need for complicated configuring to get them back to where they were before. So, "No", you didn't "miss" anything - you're just a little more astute that many users.
Glenn
Message was edited by: Glenn Carter
- 0
Icarus 3000 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
mmm i got the same kinda issue.
Using wireless I could muster a whopping 74kbps- yes that's Kilobits with an estimated transfer time of just under a week.
Using ethernet (Cat 5) 1.7Mbps was the order of the day.
I took it into the apple store they didn't know anything really about the time capsule. They've downloaded my data onto a new one for me and now i can't get into the new TC.
I am thinking about chucking the TC on a bonfire but figured that fireworks would be a cheaper and far more entertaining waste of money.
- 0
OliverBGD ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
CAT5e and CAT6 supports 1Gbit. Cat5 doesn't support 1Gbit.
- 0
BigBoeing ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Glenn,
Thanks very much for your assistance and thanks to the others who provided me info regarding ethernet cable differences. The CAT 5 cable I used today for the Time Capsule initial full backup was about eight years old so I suspect it's CAT 5 vice CAT 5e. I ordered a 25' CAT 6 cable this afternoon to have available for any future ethernet requirements between our machines.
I completed the initial full Time Capsule/Time Machine backup using the CAT 5 cable on two out of our three computers today. It went MUCH faster than with my wireless attempt, and I'll be anxious to see what the CAT 6 cable does to improve backup speed over the CAT 5.
Were the initial production Apple Airport Extreme Base Station 802.11n units Gigabit capable, or was that a follow-on improvement to latter models and the Time Capsule?
Thanks Again,
Jim