Benches Networking

5

Airport Extreme IP Address Keeps Changing…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I am printing from Windows Vista through Airport Extreme. I have been able to successfully print, but every time the router is unplugged, the IP address of the Airport changes. In order to print, I then have to go into my printer port and change the IP address to match the new one. Needless to say, this is a huge pain.

Any suggestions on how to change the Airport Extreme setting to prevent this?

(Btw, my airport is connected to an office LAN that uses DHCP. Of course, I have no authority or ability to change the LAN settings.)

Message was edited by: bskluger

5 replies

Sign in or join Beachball Help to reply.

  1. 0

    Tesserax

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Since you are not able to administer your office router, you will have very limited options. Basically you will want to assign a static IP address to your AirPort Extreme Base Station (AEBS). Typically you would assign this address outside of the range of IP addresses provided to the local network by the DHCP server in the router. If, for example, this range is: 192.168.0.2 to 192.168.0.100; you could set the IP address of the AEBS as 192.168.0.101.

  2. 0

    Totem

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes, you can set up a static IP address on the Airport Express.

    1. Open Airport Utility.

    2. Open Manual Setup.

    3. Open Internet

    4. Open configure IP4 and change to "Manually"

    5. Type in an IP address that is within a suitable range. It will probably show an IP Address that the DHCP has assigned. On my router, a Linksys, IP addresses are assigned between 192.168.1.100 and 192.168.1.150. In order to pick a static IP address you must assign a number that is above 192.168.1.150 or below 192.168.1.100. Do not choose 192.168.1.255 as that is reserved for router function. If you are using Apple products, the IP Address will appear as 10.xx.xx.xx. be sure that the last set of numbers are outside the range of DCHP.

  3. 0

    Tesserax

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Since you are not able to administer your office router, you will have very limited options. Basically you will want to assign a static IP address to your AirPort Extreme Base Station (AEBS). Typically you would assign this address outside of the range of IP addresses provided to the local network by the DHCP server in the router. If, for example, this range is: 192.168.0.2 to 192.168.0.100; you could set the IP address of the AEBS as 192.168.0.101.

  4. 0

    bskluger

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Do you know how I can assign a fixed IP to my Airport Express of Extreme? Is this done on the device itself?

  5. 0

    Totem

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes, you can set up a static IP address on the Airport Express.

    1. Open Airport Utility.

    2. Open Manual Setup.

    3. Open Internet

    4. Open configure IP4 and change to "Manually"

    5. Type in an IP address that is within a suitable range. It will probably show an IP Address that the DHCP has assigned. On my router, a Linksys, IP addresses are assigned between 192.168.1.100 and 192.168.1.150. In order to pick a static IP address you must assign a number that is above 192.168.1.150 or below 192.168.1.100. Do not choose 192.168.1.255 as that is reserved for router function. If you are using Apple products, the IP Address will appear as 10.xx.xx.xx. be sure that the last set of numbers are outside the range of DCHP.