Benches Networking

4

HP PSC 750 - not working on Leopard 10.5.1

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Following some previous advice I saw upon encountering this problem, I deleted and reinstalled the original HP drivers (from the HP website). This fixed it, for a short while. But within days or even hours, the printer stops working again completely:

1) After this time during troubleshooting I notice under System Prefs> Print & Fax that 2 printers have become listed with the same name, PSC 750. One of them is default.

2) Trying either printer does not work. Using generic drivers (included with Leopard) does not work.

3) The printer is connected by USB.

4) When sending a print job, I can click on Info and see supply levels of black and color ink etc., but the print job will just get stuck at "Connecting" or "Printing" and won't actually print.

5) The only way I can get the printer to work again is to delete all printers, choose Applications> HP> Uninstall and then reinstall from the downloaded installer.

Suggestions? I can't figure this out.

4 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I plugged my old PSC 750 into a new MacMini Intel running 10.5.2 today and spent hours to get all functions back to work.
    I was not surprised as many problem arose when i upgraded to Tiger allready.

    I got EVERYTHING (print and scan) back in operation finally, but it was a bit of a nightmare.

    HP claims to have achieve (together with Apple) a print-only integration of all PSC AIO into Leopard, but looking around in google following my troubles, it appears to be a delusion for many.

    My solution so far:

    You need to press the minus sign twice in the preference panel to delete all printers from the list and download and run the three installers you can find there. First install Foomatic-RIP + gplgs-8.61-ub.dmg and then only hpijs-2.7.10-UB.dmg or it won’t run.
    I don’t link them directly as it would fail to follow update, and become dead links in a matter of weeks...
    You may then select the proper PSC 750 Foomatic driver within the preference pane.
    Works like a charm. I tried Gutenprint 5.1.7 before but no result, printing was just getting stuck on the way.

    This HP FAQ section can be useful as well...

    I also have troubles scanning with HP scan software from the last (probably ppc) release of HP proprietary drivers and utilities for Tiger, but it DOES scan at least once, then says it has problem to connect to the TWAIN source.
    The solution i found in HP FAQ is hilarious. I bumped into this official workaround on their support site, when i had the same trouble after upgrading my PB800 to Tiger.
    HP support diagnosis:

    Airport and Built-in Ethernet cannot be enabled at the same time.

    If you are using Airport to connect to the internet they suggest to go to System Preference-Network and JUST GET RID of the ethernet connection in Network Status!!!
    Well that WAS true in Tiger.
    And if, like i do, you have a home cable network for old non-airport machines you may as well think about buying a new scanner...

    Even after setting Ethernet off, at many occasions the scanner freezes on preview or scan and comes back to work after an USB unplugging and sometimes only after a restart of the PSC or even a reboot of the mac with the printer unplugged (to the worse you might need to unplug the PSC power cable) .

    Good luck!

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I got upset as it started again to freeze on print job. That was solved in a minute going back to the LinuxPrinting website where the drivers come from.

    if you get stuck printing with Foomatic+HPIJ and GhostScript, there’s a debug trick.

    Message was edited by: Dowser2012

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for this - you saved the day!

    Given your expertise, perhaps you can tell me why DRAFT printing no longer works - this was the origin of my troubles. I migrated from a G4 Powerbook 10.3.9 to this mini, uninstalled and reinstalled the printer, and then could not print at all! I print for my own purposes and rarely need STANDARD print. This should prolly go in another post, but for now, any ideas?

    Thanks!

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I am using Leopard 10.5.3. I had printing problems with HP PSC 750 , too. I think the easiest way to workaround this is to use HP PSC 950 driver that came with Leopard 10.5.3. This is how I did it,

    - connect your HP PSC 750 to your Mac machine
    - It added HP PSC 750 printer to you machine automatically
    - go to System Preferences
    - click "Options & Supplies" button
    - click "Driver" tab
    - switch driver to HP PCS 950 - Gutenprinter v5.1.3

    That's it.