Benches macOS

13

Application Switcher problem

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

When using magic mouse to bring up application switcher, the switcher pops up, but the apps are rapidly highlighted in sequence continuously, so I can't choose one. I remember this happening perhaps a year ago (using Leopard), but don't remember what the fix was.

Any help appreciated!

13 replies

Sign in or join Beachball Help to reply.

  1. 0

    kostby

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Sounds like a stuck key or button.

  2. 0

    LowIFR

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes, that is what it acts like, but that is not the issue. As mentioned, I do remember there was some conflict (probably something in system prefs) causing it to happen.

  3. 0

    Merged Content 1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have this problem as well but cannot seem to figure it out. I have a Magic Mouse, but this used to happen with my old Logitech also which tells me its probably not a mouse issue. Any ideas what that prefpane conflict was?

  4. 0

    petecohen

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Same problem here as LowIFR... Using a Logitech MX Revolution and SteerMouse v3.8. Just upgraded from 10.5 where it was working perfectly to 10.6.2. Now when I hit the button I have assigned to the Application Switcher it just rapidly scrolls through the icons - then its like a lucky dip to try and hit the button again on the application I want to switch to!

    Command+Tab still works as it did under 10.5.

    Please help!

    Thanks!

  5. 0

    petecohen

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hmmm... seems I probably should have tried the obvious before crying for help.

    Upgraded SteerMouse to the latest version and restarted, and appear to be back in action.

    Hope this helps someone out there!

  6. 0

    Mr Greggan

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm also having the same issue with the app switcher. I changed the trigger to the touch pad on my MacBook Pro, but it still scrolls across the app icons. Very annoying.

    I'm using the Better Touch Tool

  7. 0

    Kevin Ralston

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I never had that problem with the magic mouse but I just bought a new iMac (iMac i7) and found the new bluetooth magic mouse doesn't have a Application Switcher option like the usb magic mouse does. I found that you can use the hot keys command and tab to bring up Application Switcher but it would just cycle through all the open apps like you write of. BUT then I found that if you first press the command key and then while holding that key down you press the tab key and then lift up on the tab key you can then use the tab key to select the application you want to switch to. Sure is nice, but I wish the new bluetooth mighty mouse had the side buttons for doing things like that.

  8. 0

    William Wilson5

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I started having the same problem (application switcher cycling rapidly through apps continuously) recently and blamed it on my Microsoft Intellimouse, but it also happens with Apple's Magic Mouse and will happen if I hold down the Tab key when using the Command-Tab access.

    I think it began after installing the 10.6.3 update. Could this be a bug in the update?

  9. 0

    Cottser

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I've been having this problem for ages, Cmd-Tab getting stuck in a loop.

    The mouse has changed (previously wireless Mighty Mouse, now Magic Mouse), and I have one of the older bluetooth keyboards (with the full numpad).

    As far as I can remember this hasn't happened when using the built-in keyboard.

    I'm still on Leopard.

  10. 0

    William Wilson5

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    After talking with an Apple rep through AppleCare I found that using the Command-Tab combination to invoke the application switcher works correctly as long as you don't hold the Tab key down--that acts just like holding down a letter key when typing. Instead, invoke the application switcher by the Command-Tab combination, then release the Tab key while holding down Command. Then you can tab through the apps and choose the one you want.

    Apple's Mighty Mouse works correctly in calling up the application switcher and allowing a choice of apps. I like Microsoft's Intellimouse 3 better for several reasons, though, so I bought a new one, hoping the old one just had a mechanical problem. Not so--the new one cycles rapidly through the app icons just like the old one. This appears to be an incompatibility between OS X 10.6.3 and the Intellimouse software v. 7.1. I sent Microsoft feedback on this and asked them to correct it in the next version of the Intellimouse software.

  11. 0

    Cottser

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Just so we're clear, I'm not pressing Cmd and holding Tab. I press and hold Cmd, then briefly hit Tab to bring up the application switcher. If you're pressing Cmd and holding Tab, it
    should be repeatedly cycling through the applications. That's the expected behaviour.

    The issue I have is that occasionally it gets stuck in a loop where it rapidly switches through all the applications, while I'm just sitting there holding Cmd. It doesn't stop when I let go of Cmd, so it's not a key getting stuck in my case.

  12. 0

    45Caliber

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I started having this exact problem only after upgrading to Snow Leopard using a 10.6.3 install disk. I first thought it was a conflict with the Logitech mouse drivers, but am seeing here that people are having the same problem regardless of mouse brand.

    Releasing and tapping the tab key while holding command doesn't change anything. The applications continue cycling rapidly while only holding command.

    I'm also having a problem with Expose in SL where I can't select any application window but the last. The focus will appear to shift, yet still only allow selection of the furthest window in the lower right.

  13. 0

    45Caliber

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Update: This does in fact seem to have been an issue with Logitech Control Center, regardless of version I tried (2.7, 3.1, 3.2). The only way I was able to stop the erratic behavior was to remove all traces of LCC.

    Unfortunately, there is still strange behavior using only the Apple drivers: Expose/Dock aren't responsive to mouse position, contextual menus don't work on right-click (you can't select anything), single clicks require double clicks, etc.

    I'm now using Steermouse for my MX mouse and DoubleCommand to swap modifier keys on my Elite keyboard. No more erratic behavior.