Benches macOS

4

Using HP Laserjet 5100 as a postscript level 3 device

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hi Smart People,

I'm usually pretty good at figuring this kind of thing out, but this setup has me at the edge of my understanding. If you could help me out, I would be very grateful.

I'm planning to use my 5100 to print offset plates for use on a printing press. I'd like to be able to use Adobe Acrobat Pro to output RIP-processed color separations with trapping. Acrobat says that this is possible with Postcript Level 3 devices, and as far as I know the laserjet 5100 is such a printer.

I'm connecting the printer to the computer using a ethernet cable to the Jetdirect (directly, without using an ethernet switch). I can get the printer printing just fine, but when I try to send a separation job to the printer, I get an error message on the printer display (79.00 PRINTER ERROR). I've tried using both AppleTalk and TCP/IP and get the same results.

I've read in the HP documentation that the parallel port is the only connection that can access all of the printer's capabilities. This has me thinking that connection the printer via the Jetdirect precludes the use of the internal Postscript Level 3 RIP. So my questions are:

Is this true?

If it is true, is it possible to connect the printer via the parallel port to my mac? Maybe with a parallel-to-USB converter cable? Or with an ethernet switch with a parallel port printer server?

I've seen mention on the internet of a set of files from HP called something like "HP Laserjet Monochrome for Mac" that seems to install postscript printing capabilities, but I can't find a functioning link to the file (the file seems to have been deleted from HP's site). Is this what I'm looking for?

Is there anything else I can do (besides buy a -shudder- PC to act as a print server) to get this working?

Thanks a ton,

Gary

4 replies

Sign in or join Beachball Help to reply.

  1. 0

    greg sahli

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I think the jetdirect is the correct method to use all the printer features (postscript 3).

    Setting up a direct ethernet connection is tricky. You
    must set a manual IP address on the Mac, even to use appletalk. You should also set an IP address on the jetdirect, then add the printer using IP > jetdirect protocol.

    Set computer and printer to be in the same local-reserved subnet - example - 192.168.3.3 for computer and 192.168.3.4 for printer (subnet mask 255.255.255.0 for both).

  2. 0

    Gary Robbins

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    It prints normal jobs just fine, its just when I ask it to do in-RIP color separations that I get an error. I just read in the printer's documentation that it uses "HP Postcript 3 emulation" rather than the officially licensed PS 3 from adobe. Maybe this emulation doesn't support all the features of PS 3?

  3. 0

    greg sahli

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You could be right. I found this in an old list of HP error codes:

    79 SERVICE (Document Error)

    1. This problem can be caused by software/drivers, memory PCA's, font macro personality cartridges, or optional I/O cards.

    2. Replace formatter PCA.

    4000/4050/4100/5000/8000/8100 Only:

    1. Cycle power.

    2. Reset interface cable

    3. Remove Dimms, cycle power

    4. Replace Parallel interface

    5. Remove EIO cards, perform cold reset

    6. Replace formatter

  4. 0

    greg sahli

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Workarounds you could try:

    Is there a PS Level II option in the print dialog?

    Is there a Gutenprint driver?

    Or, try the hpijs driver -

    http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs