Benches macOS

15

Printer Canon Pixma MP620, Wifi problem

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have a new Canon Pixma printer mp620 (USB / LAN / wifi)

I can not get the printer with the wifi ?

It works well with USB cable directly on the iMac!

This printer is used in a wireless network with a Windows XP computer with a wireless modem router USRobotics

What is wrong with the iMac ?

Tips: the printer works well in wireless with the PC WinXP

Canon doesn't propose new driver on http://www.canon.com !

Thank you in advance ...

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    Fishin'Fool

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    My MP 620 works great with my iMac and MacBook. It was critical that I followed the installation directions from Canon for a Mac. The manual is a little hard to follow as it skips pages based on your installation type. Disconnect the USB cable, remove the printer in Print & Fax in System Prefs (Click on Canon printer, then the minus sign). Now follow the installation directions exactly. After the software install, the iMac will restart. The Canon network utility should start automatically so you can configure the wireless setup of the printer. Hope this helps!

  2. 0

    Tricoline

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thank Fishin'Fool,

    But my problem is : when Canon Network utility start, it's "crash", and printer is not displayed in list, nothing...

    Canon manual is very very bad, i see !

    Canon printer installation isn't easy !

  3. 0

    Fishin'Fool

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    In System Prefs, Network; make sure Airport is turned on. Beyond that, I cannot think of any other ideas other than what I already posted. If a reinstall does not work, you may have to contact Canon.

  4. 0

    Tricoline

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Other problem !

    On the website of Canon Europe, there are no drivers (or programs) for Mac OS X (for download) for this printer !

    Only a CD-Rom for Mac OS X comes in the box !

    Nothing in the Web ? Why ? Bug ?

  5. 0

    sgtracey

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I had the same problem. Try this. After installing the Canon software per their instructions, open System Preferences-Hardware-Print & Fax. Click on the + button to add a printer. This is probably where you got hung up before since the pixma printer doesn't show up. Click on the "More Printers" button at the bottom of the Printer Browser window. This will open another window. Click on the drop-down menu at the top of this window (when I first opened this window Appletalk was selected), and select Canon IJ Network. If everything goes well, the MP620 series.../Canon IJ Printer will pop up. Select it and click on the "Add" button at the bottom of the window. This should add your Canon printer as a wifi printer to the printer list, enabling you to print wirelessly. Hope this works for you like it did for me.

  6. 0

    gallan

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I hope it worked for the others - it did for me. My new Epson TX700W worked first try on the Bootcamped XP but not the Mac. I did as suggested by sgtracy and saw my printer OK, clicked + and it then found the Epson followed by(IP). Once I made this the default everthing works fine whichever partition I print from. Thanks for the tip sgtracy.

  7. 0

    chris7ian

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I've just bought the same printer to use wirelessly on my MacBook Pro and I can't get it to work either!

    How do I "Prepare a wireless LAN access point"?!

    The prompt on the printer tells me to 'see the access port manual for details'... and that's where it loses me!!

    Someone help please!

  8. 0

    PAHU

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If you want to connect to the MP620 via wireless, then the instructions are stating that you need to have your wireless access point (the wireless router) ready and you need to know some information about the router, such as its SSID (its name) and any password you will need to connect to it.

    The setup is pretty easy. It's just the manual tries to cover too many options.

    First you must have the printer driver installed and be connected to it via USB. This is so you can communicate with the printer to configure the network (LAN) settings.

    With the printer appearing in the Printer list, you can open the printer queue and select Utility. From the new window, select the Printer shown as a USB device and click the Network tab. This will guide you through connecting it to your wireless network. This is where you need to know your access point information. Once the printer is connected to your wireless network, you will be prompted to turn off the machine and then unplug the USB cable. When you turn the printer back on, you can then add the printer queue again, this time for the network connection. As others have said above, select to Add then select More Printers > Canon IJ Network. The MP620 should appear in the list, which you select and then click Add. Now you are ready to print...

    PaHu

  9. 0

    Smitty8000

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks PAHU,

    I've been desperately trying to figure out why this wouldn't connect with my network, and you answered it perfectly. I thought being wireless, I wouldn't have to connect the USB cable, but I did to transfer the settings. I kept trying to add the mac address myself to my network. It's working fine now. Thanks again.

  10. 0

    Carey Head

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi There. Just bought the Pixma Mp620 tonight and so

    far everything seems to work but the scanner, which is

    a major reason we bought it. We have it connected

    wirelessly to our network at home and we can print

    from our laptops (docs and photos) but the scanner

    gives us a communication error that states - "Cannot

    communicate with scanner. Cable may be

    disconnected or scanner may be turned off. Check

    status. Scanner driver will be closed". Any idea what it

    could be? Will the scanner not work wirelessly? Does it need to be directly connected

    to the computer via USB for the scanner to work?

  11. 0

    PAHU

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    It sounds like your Mac is trying to scan via USB rather than via the network. If you look at the menu bar, there should be an icon on the same side as the time, time machine, etc, that is the Canon IJ Network Scan Utility (it's a strange icon so I am not sure how to describe it). It might be grayed-out if it is not configured. Click it and a menu will appear letting you turn the utility on. Via this icon you can also select 'Open Settings'. This will present a search window allowing you to locate the MP620. Once you add the MP620 to this list, you should be able to scan via your wireless network.

    PaHu

  12. 0

    M.D.

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Big Ups PAHU, I was struggling until I found your concise instructions.

    Many Thanks

    Matt

  13. 0

    woodenlore

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    So I just picked up a brand new iMac and the MP620 printer as well. Tried following everyone's advice on here and the wireless connection just will not be made.

    When hooked up to the USB port the printer is fine but wireless is a whole other story.

    I've reinstalled the software, turned off the Firewall in my system preferences, removed an tried to add the printer back under the Printer & Fax area. I've had it hooked up to the USB while trying all this as well. I'm trying to get it to grab the Mac's built in Airport wireless signal, the gentleman at the Applestore stated it will work fine with that.

    Now, am I missing a step? This thing has me stumped!

  14. 0

    PAHU

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The guy in the Apple store was wrong. You cannot connect the printer directly to the Mac via wireless (Airport). This is called ad-hoc mode. The printer only supports infrastructure mode, where a base station provides the wireless service. So you will need some sort of wireless router, such as an Airport Express, between the Mac and the MP620.

    PaHu

  15. 0

    woodenlore

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Bah! That stinks! I got it mainly to cut down on wires running from the Mac. Oh well, at least I know it's not something I did wrong. Thanks for the reply!