Benches macOS

9

SanDisk U3 Cruzer Micro 4GB, Cant create …

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have got a 4 GB SanDisk Cruzer Flash Drive which I was using with PC.... It used to have 2 partitions, One for U3 driver and Other one for data... As Mac wasn't showing it on the Finder Window, I deleted both partitions and left it unpartitioned... Now when I connect it to MacBook USB Port it doesn't appear in the disk utility but System Profiler shows it as below:

U3 Titanium:

Product ID: 0x5408

Vendor ID: 0x0781 (SanDisk Corporation)

Version: 2.00

Serial Number: 4527721136C1AFD0

Speed: Up to 480 Mb/sec

Manufacturer: SanDisk

Location ID: 0x26400000

Current Available (mA): 500

Current Required (mA): 200

Any Idea- How can I create a new partition on it and make it usable again...

Thanks....

9 replies

Sign in or join Beachball Help to reply.

  1. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Plug in the flash drive. Follow these directions:

    Extended Hard Drive Preparation

    1. Open Disk Utility in your Utilities folder.

    2. After DU loads select the flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the
    Partition tab in the DU main window.

    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the
    Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the
    OK button. Click on the
    Partition button and wait until the process has completed.

    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the
    Erase tab in the DU main window.

    5. Set the format type to Mac OS Extended (Journaled.) Click on the
    Options button, check the button for Zero Data and click on
    OK to return to the Erase window.

    6. Click on the
    Erase button. The format process can take up to several hours depending upon the drive size.

  2. 0

    Masum

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    When I connect the flash drive and open disk utility, nothing appear in the left panel..

    It used to work with windows pc and i think if i reformat it on windows then it will work again...

    I want to use it with Mac... ....

  3. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If it does not appear then either there's a problem with the USB port or the flash drive.

  4. 0

    etresoft

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    How did you repartition it? Normally those U3 drives need some funky software to repartition. You might be able to format it using the diskutil on the command line. It may not be Mac compatible. I used to have one of those things and gave it away. It works fine on PCs and on my old iBook but it never worked with my MacBook. I bought a Lexar Lightening instead. It works great on everything and is much faster too.

  5. 0

    garbageman

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    {quote}I deleted both partitions and left it unpartitioned... {quote}

    Not sure how you removed the partitions, but I used the Sandisk U3 removal utility. After that I could only get it to work if I formatted it on an actual PC with admin rights. I tried with Parallels but it wouldn't work. I have three of the Cruzers that I removed U3 from and they all work great now on my mac and PC.

    http://www.macworld.com/article/134811/2008/08/usbdrives.html

    http://kb.sandisk.com/app/answers/detail/aid/2550/session/L3NpZC80RTRsdUQxaw%3D%3D/kw/u3/rid/101834/sno/0

  6. 0

    Masum

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    First I used PC + U3 removal tool to remove first partition and then tried it with mac..

    when it wasn't working, I connected it again on PC then Deleted both partitions on DOS mode...

    Now if I connect it to PC it shows un-patitioned drive on disk manager...

    But when i connect it to mac it shows u3 drive on desktop and then disappear again...

    Think something wrong with my flash drive.. will get rid of it...

    But any idea which flash drive works well with mac and pc at the same time...

    As I need to use it on PC while i'm at uni and with Mac at home...

    Many Thanks..

  7. 0

    Masum

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I also think so.. But it appears in windows disk management ...

    Not really bother with it anymore..

    Will think about new one..

    Thanks...

  8. 0

    Masum

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yea I also tried... it will work with PC again... But not with Mac...

    Best solution is - BIN IT and GET A NEW ONE...

    Thats what I will do...

    Thanks..

  9. 0

    etresoft

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Masum wrote:

    But any idea which flash drive works well with mac and pc at the same time...

    I have two Lexar Lightenings that work great. I have an old PNY that work great but seems a bit fragile.

    I had trouble with the SanDisk Cruzer and with a number of those super-small ones. Of course, that was a couple of years ago. Things may have improved.