slipstream OSX 10.6.0 to 10.6.3
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Is there a way to slipstream or PPF patch an OSX 10.6.0 iso to 10.6.3? I'd like to apply the patches to my install media so I don't waste time doing the updates manually for every install I do...
I tried a PPF patcher but it crashed, I think it only works with CD sized ISOs. Any ideas?
14 replies
Sign in or join Beachball Help to reply.
- 0
a brody ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Welcome to Apple Discussions!
Not that I'm aware of. However, an easy work around is to have multiple partitions for each Mac model that needs to be upgraded, and use the combo update on installed versions of 10.6 on each of those partitions.
Of course you need to make sure you have the right number of licenses for installation.
Netboot is another option if you have Mac OS X Server. This allows you to have one install across multiple environments. Someone in the Server forum can explain this concept.
- 0
Topher Kessler ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
There is a way that may work, though it is not directly through the installer as you are trying to do (and I have not tried this out myself). The workaround is to install OS X to an external drive, and then update it to the version you would like. Then install Carbon Copy Cloner or another cloning utility and clone the full fresh installation to a DVD.
Note that you may not be able to clone directly to a DVD or other optical media, so instead clone to a disk image and then restore that image to a blank DVD using Disk Utility.
The resulting disc should be bootable, from which you can use the installed cloning utility to clone the disc to another computer after booting off of it. It's the same thing as using the OS X installer, just that you will not have the options for customizing the installation (leaving out or including print drivers, fonts, X11, etc).
Message was edited by: Topher Kessler
- 0
a brody ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Welcome to Apple Discussions!
Not that I'm aware of. However, an easy work around is to have multiple partitions for each Mac model that needs to be upgraded, and use the combo update on installed versions of 10.6 on each of those partitions.
Of course you need to make sure you have the right number of licenses for installation.
Netboot is another option if you have Mac OS X Server. This allows you to have one install across multiple environments. Someone in the Server forum can explain this concept.
- 0
R C-R ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
AFAIK, OS X isn't distributed in iso format, nor are the apps you mention available in OS X versions.
What are you trying to do?
- 0
derelict888 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The ISO I created from the retail copy of 10.6.0 I bought when snow leopard first came out. There is a PPF patcher for OSX but its buggy and as far as I can tell only does .ppf patches (so it won't work anyway).
I'm trying to "slipstream" patches released by Apple onto the image I created of OSX 10.6.0 retail dvd. So if I install OSX say twice a week I don't lose time installing 10.6.0 and then updating it 10.6.3 - each patch process can be an hour long or more after all is said and done.
With Windows there are 3rd party apps available that can slipstream updates, security fixes, or MS programs (like Win Media Player) right into unpacked ISOs. So if I have a vanilla copy of WinXP for example, I could use these 3rd party apps to update that XP installer to SP3 and current updates - its convenient when you install OS' often like I do.
- 0
derelict888 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
thanks brody unfortunately I don't use OSX server so netboot isn't a solution I can use atm. I could setup a pxe boot but that will still have the same problem - the installer will be 10.6.0 and I'll have to run updates to get current.
- 0
derelict888 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I guess my question is then if there is a Apple supported way to unpack update packages and apply them directly to an OSX installer image? It looks like 3rd party apps aren't available for the task.
- 0
derelict888 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Well I don't think I can do what I'm looking to do, so I'm going to close this out now. Thanks for the responses though.
- 0
Topher Kessler ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
There is a way that may work, though it is not directly through the installer as you are trying to do (and I have not tried this out myself). The workaround is to install OS X to an external drive, and then update it to the version you would like. Then install Carbon Copy Cloner or another cloning utility and clone the full fresh installation to a DVD.
Note that you may not be able to clone directly to a DVD or other optical media, so instead clone to a disk image and then restore that image to a blank DVD using Disk Utility.
The resulting disc should be bootable, from which you can use the installed cloning utility to clone the disc to another computer after booting off of it. It's the same thing as using the OS X installer, just that you will not have the options for customizing the installation (leaving out or including print drivers, fonts, X11, etc).
Message was edited by: Topher Kessler
- 0
derelict888 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yeah I might be able to push the image out on a drive, run a update package, and point the update to the drive I just moved OSX onto. I'll try that thanks.
- 0
derelict888 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
And when I mean push the image out to a drive I mean an external HD and I'm not installing the OS, just "burning" the image to it essentially. That might work.
- 0
R C-R ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The word you want to focus on is "clone." Try SuperDuper! or Carbon Copy Cloner. Both are purpose designed to make functionally identical, bootable copies of a startup drive.
- 0
derelict888 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Not sure why I didn't think to do this initially, Apple is usually easier to use... I "restored" my 10.6.0 ISO to an external HD, and then I applied the 10.6.3 v1.1 combo updater to the external HD. If I want I can create an ISO from the external HD now that it has the combo update applied. Thanks again for the replies.
- 0
The hatter ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I use DU to create sparse disk images which can then be mounted and updated with CCC or SuperDuper and kept current; restored if needed. Just have the disk space to allow it to grow, and a place to test your restore on another drive or partition.
While you are at it, setup a small OS X of just Apple with updates, use that when it comes time to repair or run maintenance, and keep that on a handy .DMG also.
Using disk images to hold an image of a volume; or media library (maybe backup iTunes Media to a disk image also).
Nice part, they aren't indexed or scanned and won't show up in searches, just have to mount to have access to files.