Benches macOS

7

Cant use my network printer

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hello you all

I got a new network printer at work. im trying to install it to my mac book pro for a week now.

maybe someone can help me to get this printer to run on my macbook

im using a Macbook pro 6. generation with OS X 10.6.3

My printer is labeled as a Ricoh imagio neo 300. but when i access the printers setup page with the ip adress, its listet as a Ricoh aficio 3030.

here is what i have been trying to do the whole time:

When i add the printer with an IPP protocol and the automatic selected driver, the printer always gets paused when i want to print. if i press resume, it imediatly pauses again.

when i use the LPD Protocol, the Print queue opens and closes right away, without any error message.

same thing with HP jetdirect socket.

I tried all 3 protocols with all the drivers from apple and guten print. i tried the ricoh aficio 3030 drivers and the ricoh imagio neo 300 drivers.

i connect to the printer trough a router. my ip adress is 192.168.0.103 and sub net is 255.255.255.0 (DHCP)

the printers ip is 192.168.0.72 and sub net 255.255.255.0 (static)

i got the admin for the printers web image monitor.

i hope i could give you all enough informations about my problems.

thank you guys for the help

regards

7 replies

Sign in or join Beachball Help to reply.

  1. 0

    PAHU

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The LPD or HP Jetdirect sound like they would be your preferred protocol. I would create the printer queue again, this time I would select Generic PCL Laser Printer in the Print Using menu.

  2. 0

    reubaer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    thanks for the fast reply

    i just tried it. i used printer queue: lp, text, and auto... same problem... printer queue opens with one job then closes after one sec by itself.

    any other idea?

    regards

  3. 0

    PAHU

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    It would be good if you could check the job log on the Ricoh. This would show if the job is reaching the printer and then not printing for some reason, or if the job is not even getting to the printer.

    If you can see that the job is getting there but not printing, then there could be some sort of Job Accounting system on the Ricoh that is stopping your unauthorised print jobs from the Mac. This would therefore force you to use the correct Ricoh driver, so that you get the interface to enter your credentials so that you can print. If you find that Job Accounting is being used, then you could go back to using the Ricoh driver you had used previously and checking the menus in the print dialog for some sort of Job Accounting entry.

  4. 0

    reubaer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    hey there....

    ok, when i try to print using the IPP protocol and the printer queue goes to paused, there is no job getting to the printer log.

    but if i use the LPD Protocol there is an error on the printer log saying: "the job was reset."

    so what does that mean? has this something to do with my driver? what do you recon?

    regards

  5. 0

    PAHU

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    reubaer wrote:

    but if i use the LPD Protocol there is an error on the printer log saying: "the job was reset."

    so what does that mean? has this something to do with my driver? what do you recon?

    The resetting of the print job can indicate that the printer language you are using is not supported by the printer. Looking at the specs and drivers available for the Aficio 3030 on the Ricoh USA web site, it shows that this model supports three printer languages, RPCS, PCL5/6 and PS. For Mac OS X 10.6, only a PPD is offered for this model, which means that the machine would have to support the Postscript printer language. Also, since the Generic PCL Laser Printer driver did not work either, and if it showed the same 'reset' error, then this would indicate that the printer does not support PCL5/6. So that only leaves you with RPCS, which is GDI-based (raster) printer language and Ricoh only offers a Windows driver for this language.

    So you need to somehow determine which printer languages your 3030 is configured to support. You mentioned being able to access the internal web admin page. This should show what printer languages are supported, most likely under a Printer Configuration page. Once you know what languages are supported, then we can progress with what drivers to use on the Mac.

    Pahu

  6. 0

    reubaer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    good morning 🙂

    on the web image monitor, under "status" Printer language" there is:

    Automatic Language Switching : 13.02

    Customized PJL : 13.02

    RPCS : 3.2.15

    RPDL : 5.29

    i donwloaded the printer driver PPD from the ricoh support page. it didnt work.

    i found in other forums that it could be something with the RPCS.

    what driver shud i download?

    thanks again

  7. 0

    PAHU

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    As I said before, I don't think there is a Mac driver for RPCS. I could only find a Windows driver for this printer language.

    The Linux Foundation does list the Aficio 3030 as a supported model with its pxlmono package. But I believe that to use this driver the Ricoh would still require PCL support - and I don't believe the entry 'Customized PJL' means it has PCL. (Given that your Generic PCL Laser test failed then this would back up that theory).

    Still, if you want to give it a try then you can download it via this link.

    http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/pxlmon o

    If the above does not work then you should give Ricoh a call and ask how much the Postscript kit will cost. Anyone who buys an office product where there are Mac's should ensure there is Postscript support. Proprietary languages have and always will cause problems, especially as new OS's are released such as Snow Leopard.