Irregular Printing - Xerox Phaser 8560
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I've had this Xerox Phaser 8560 for years and have been using it with Snow Leopard without issue.
Upon recent update to 10.6.3 (from 10.6.2) I am now having issues where one print will be fine, but then another separate print will just come out as data/numbers/multiple useless pages.
It's oddly inconsistent and it does not matter which program I am printing from.
I have removed/added the printer; completed restarts; checked printer firmware; reset printing system; etc... the usuals.
Anyone else having any 8560 issues?
15 replies
Sign in or join Beachball Help to reply.
- 0
ltcjcw ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Having exactly the same problem with my iMac and 8560. Looks like it's printing the postscript file. Have tried re-installing driver, but didn't work.
- 0
Tommy Boothe ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I too am having the same problem. I am convinced it has to do with the 10.6.3 update because immediately prior to installing the update, I never had this problem.
- 0
Curtis McMichael ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yep, I was printing a brochure before the update > completed the update because I'm an update tool > and then the brochure wouldn't print correctly anymore. Oops.
I contacted Xerox and they've sent me straight to level 2 because we couldn't solve the problem. We discussed reverting back to the 4.7 firmware version, but I cannot figure out how to do it because my printer is now saying that its tcp address is 0.0.0.0 and that's not working for the methods of loading the firmware file (browser or ftp).
Which makes me wonder if its a tcp address issue? I'm just not techy enough to noodle that out (for the record, I am connected straight to printer from iMac via USB 2.0).
- 0
ltcjcw ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Can't go back to 10.6.2. Too bad. That seems to be the culprit. Maybe Xerox and/or Apple will come up with a fix. It did seem to get better for a moment after a printer/computer restart. By the way, we've got two iMacs linked to the 8560 and are getting the same problem from both machines.
- 0
Curtis McMichael ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am having an increase in good printing by making sure that the printer is not on "stand by" or energy saving mode when I print a document.
I go over and manually "wake" it. Then, once it's ready, I print.
This has cut down on the amount "data/PS" printing... maybe down to 1/3 of the number.
Still an issue, but an improvement.
- 0
ltcjcw ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'll give it a try. Got to help. I keep checking to see if Apple is going to update 10.6.3. Sure seems like that's where the problem is. Also plan to re-install driver eventually. But putting that off for the moment.
- 0
jwb777 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Just to add my 2 cents. I'm having a similar issue on my Xerox 8400N. When I send multiple jobs to the printer, the 1st job prints fine but it takes about 30-45 seconds to clear the 1st job (simple 1 page print job) and go to job 2 and the same thing with subsequent jobs.
It printed just fine before the 10.6.3 update. I've tried deleting the printer and the library and re-installing everything but no help so far.
Printing anything with multiple jobs has become a really tedious process.
- 0
Courtney23507 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Me Too Post: Phaser 8560 & 10.6.3 just don't play well with each other!
The random acts are driving me crazy, even when the printer isn't in a power saving mode.There has to be a better way of handling customer support...
-C
- 0
francisf ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
same postscript output irregularity here on mac pro and imac via networked 8560.
I print a lot and it started happening with 10.6.1 for me.a friend has the same problem on 10.5.8. and USB.
so there is more going on here.
- 0
ltcjcw ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Just to update folks on this thread. Spent a couple of hours today with Xerox folks. No joy. They has us:
1) Upgrade firmware to PS 4.10.0. We needed to do that anyhow, but didn't do any good.
2) Redownload/install driver. Did that a couple of times.
3) Various superstitious behaviors such as flushing out RAM and turning printer off, unplugging cables, and turning back on.None of it worked.
Next step will be calling Apple, but don't have time to do that today.
- 0
Curtis McMichael ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I've done the same things as Itcjcw with Xerox. No improvement.
Is everyone printing via USB like I am? Looks like francisf is networked (ethernet?) and is also having issues.
---------
Notes:
PCL 5c Version: 5.0
Firmware: System 1.3.7.P / PS 4.10.0 - 0
ltcjcw ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
OK. Here is something that works. So far. The last 30 minutes or so. Based on several long chats with Apple reps and all sorts of tries.
The short version is: Re-install Snow Leopard 10.6, and then go back to 10.6.2.
We’ve done it to two iMacs and it seems to be working. Note: 8560 connected via USB to one machine and “shared” with a second iMac.
How to:
First, turn off automatic updates. Apple>system preferences>software update.
That’s to keep you from automatically upgrading to 10.6.3 in the future until Xerox/Apple fix this problem.
Install Snow Leopard from CD. Check to see if it worked. On one of our machines we had to boot off the CD to get 10.6 to re-install. On the other machine we did not have to boot off the CD.
Lots of whirring and buzzing here… 🙂
Upgrade to 10.6.2.
Download is here :
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosxv1062updatecomb o.htmlDelete, then add back the 8560 printer: Apple>system preferences>print and fax> click printer, hit minus, delete, then add back. Not sure this in needed, but won't hurt.
You might need to flush the printer’s RAM as well. Can do that from the panel on the front of the printer. Not sure this make any difference, but can't hurt. We’ve also had a problem with printer taking itself offline, but don’t know if this is a related problem or not.
Thanks to Andrew at Apple support for reminding me how to boot off the CD.
Hope this works. Please remember I am not a Mac expert. Just a guy who’s trying to figure out this problem. You may want to talk to Apple yourself first before trying this.
Message was edited by: ltcjcw
- 0
Curtis McMichael ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I appreciate ltcjcw's post and will look forward to hearing how it works out (I imagine that it would work fine).
In the interest of struggling on (and in case Xerox or Apple bothers to read this post) I'll continue with my notes:
1. I downloaded and installed the 10.6.3 combo update.
a. Had an improvement at first, but appears to be a fluke.
b. I continue to be able to manually wake the printer from sleep and get a "good" print, but anything that follows that print will be data/ps info.
c. I can then manually restart the printer and get another "good" print. Sometimes more than one.Overall, 10.6.3 combo update did nothing to improve performance of printer or irregularity of printing.
- 0
Dogcow-Moof ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Apple doesn't officially read these boards for technical content, so if you want to "notify" Apple of the issue, you should do one of the following:
1) Contact AppleCare
2) Sign up for a free developer account and file a bug report at
http://bugreport.apple.com
3) Leave feedback here:
http://www.apple.com/feedback/macosx.html - 0
EileenF ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I spoke with Apple and Xerox today. Apple insists they no nothing about an incompatibility after going to 10.6.3. Xerox tells me if I switch from using a usb cable to a network cable it'll be fine until Apple comes out with a fix.
Something to try at least....