Wireless printing on Canon MP560 OSX 10.4.11 HELP!
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi,
I just bought a Canon MP 560 and for the life of me cannot get the thing to print wirelessly. I connected it via usb and ran the printer setup utility to get the Canon Networking Tool to configure the network settings, which seemed to work but when I try to print it just says "printer not responding." Can someone please help me? Thanks!
13 replies
Sign in or join Beachball Help to reply.
- 0
BDAqua ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi chibilyn, and a warm welcome to the forums! 🙂
What IP did you give it?
What is your Airport's IP?
- 0
chibilyn ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The printer is apparently at 192.168.1.103. I have a Linksys WRT54G2 router. Is my IP safe to put here?
I just tried it on my other computer which is an intel based mini running OSX 10.5.8, worked like a charm. So the problem is with 10.4.11 or my computer?
- 0
BDAqua ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Is my IP safe to put here?
Your local IP should be OK, but it should be 192.168.1.x right?
- 0
chibilyn ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Your local IP should be OK, but it should be 192.168.1.x right?
Yes
- 0
BDAqua ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Did you try setting it up as an IP Printer?
- 0
- 0
BDAqua ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Sorry... no idea why simple printing has turned into Rocket Science on Macs!

Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
- 0
PAHU ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
To add the networked printer, you need to select More Printers > Canon IJ Network. If the 560 is correctly configured it should appear in this new view. And when you select it the Print Using will automatically be set to Canon MP560 series.
If the printer is not visible after selecting More Printer > Canon IJ Network, then either something is blocking this multicast or the 560 network settings are not set correctly. You can confirm the settings via the control panel of the printer. Device Settings > LAN Settings > Wireless LAN Settings List.
Pahu
- 0
chibilyn ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
It's working now. I'm not sure what exactly made it work, I think it was a combination of getting the driver set up correctly using OSX 10.5.8, resetting the printing system as recommended by BDAqua and following PAHU's instructions, which I tried to do before this but didn't work at first. Thank you everyone!
- 0
BDAqua ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Great to heat, thanks for the report! 🙂
- 0
rezzz ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Is there any reason to think that WPA2 security would prevent my printer from being hooked up wirelessly? Only because that I think is my only option left to try and disable the security and see if that works. I can't seem to get this printer to print wirelessly. The printer itself says it's connected, but I can't ping it, nor does it show up in my Attached Devices list on my router.
- 0
rezzz ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
What is the security on your wireless network? WPA2 Personal? Because I think that's why mine isn't working - I think that if I knock off the security on my router it'll work just fine.
I'd appreciate any help/info, thanks!!
- 0
BDAqua ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi there, quite likely if your Printer can't do WPA2.
Before it can get an IP from the Router, it has to be able to sign in with WPA2.