HP PSC 2355 - scan impossible "unknown error"
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello,
i've an Macbook pro previously running MACOSX 10.5 connected to an HP PSC 2355 printer/scanner.
Everything was running fine in this config.
I've upgraded the OS with the new Snow Leopard 10.6
Printing runs fine
Copying runs fine too
Scanning fails : the scan begins and after 3 seconds, it stops with the message "unknown error" ("erreur inconnue" in my french version 🙂
HP says they don't provide any driver for OSX 10.6 (drivers are included in the OS...)
Has someone any idea about this problem ?
Thanks in advance.
15 replies
Sign in or join Beachball Help to reply.
- 0
pengtao ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Did you know that HP Scan Pro no longer works under 10.6? For scan, you should go to Image Capture, Preview, Print & Fax preferences pane, or the regarding Printer Proxy. Check Mac 101: Printing for some knowledge.
- 0
Ereneril ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The software starts fine.
The Scan/print is declared and seen by the OS. Everything seems to be OK in te configuration. (Even the printing and copy functions are running without problem)
The problem occurs when the scan begins : during 3 seconds, the scans runs (i can see the light of the scan) but it stops with the error message "unknown error"
TIA.
- 0
Kurt Foster ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
HP Scan Pro no longer works under 10.6 - I know it launches, but it doesn't work beyond that. Go to your system preferences and print and fax. Select your printer that you see and double click it. See the printer and scanner choice? Press scanner. Keep that icon in your dock. That is how you scan in Snow Leopard.
- 0
Ereneril ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello Kurt,
it is what i do.
In the preference, i see the printer. And i can select the Fax but it doesn't work.
It is not a problem of using but probably a problem of driver (it is not a mecanical problem with the scan because the copy function works)Have you any idea ? Is it possible to reinstall the drivers from Apple CD ?
- 0
tancat ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Going through the Print & Fax pane, I select the "Scan" tab and then "open scanner." I get a message that says "Scanner Warming up," then after 2 minutes, "Scanner reported an error -- An error occurred while communicating with the scanner." As others have said, Scan Pro has stopped working (says "scanner could not be found.")
I went through the same **** the last time I upgraded to Leopard, and finally solved it using Scan Pro. I've learned my lesson -- don't upgrade until all these kinks have been worked out.
- 0
tancat ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Aha! Scrap that. Don't ask me why but I tried exactly the same thing and it's worked. Preferences, then Print and Fax, then Open Scanner, then Scan. It said "Scanner Warming up" and then, who knows why, it managed to communicate with the scanner. I have an HP PSC 2355, for what it's worth.
- 0
NSonic101 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have the same problem. But when I go to Fax and Print prefs, there is no "Scan" tab...can you please help?
- 0
tancat ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yeah, I had a similar problem at first. The scan tab was there, but then I followed a tip on the HP site and reinstalled the printer and it disappeared. I'm not sure when it reappeared but I think it may have been after an Apple update which included new HP drivers. Try checking for Apple updates, restarting, then looking again in the Print & Fax control panel.
- 0
NSonic101 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have downloaded and installed new HP drivers from the Apple web site, but the problem is still the same..It is not possible to scan from within the system and from HP Device manager. ScanVue works but I don't want to pay for it. HP and Apple software should work...
- 0
Joseph Kriz ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
You need to uninstall the HP software using the uninstall program in the Hewlett Packard folder inside your applications folder.
The HP Device Manager and the HP Scan Pro no longer work properly.
Remove the HP software.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&dlc=en&lc=en &jumpid=regR1002USENThen you can go back into the Print & Fax preference pane and add a new printer.
Your scanning capabilities should be working but you will no longer have HP Scan Pro...
This only works for HP printers that are on the supported list for scanning which the PSC 2550 series is. - 0
NSonic101 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have unistalled all HP software, reintalled HP drivers downloaded from Apple web site. But I cannot add new printer as there are no printers available from the drop list in Fax and Print preferences..
- 0
pengtao ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Read the "Mac 101: Printing"
http://support.apple.com/kb/HT3771 - 0
Joseph Kriz ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I would like to make a typo change from my post above.
It should read 2350 series instead of 2550 series.NSonic,
This thread is about the HP 2355 all-in-one printer.
Is this what you have?
If so, try right clicking in the left side of the Print & Fax preference pane and "Reset printing system"
Make sure your printer is on and connected to the computer.
The printer should be added automatically but if not, then click the + sign at the bottom to try and add it to the list. - 0
HP Mac Architect ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have posted a reply to NSonic in the FAQ thread, since he does not have a PSC2355. For those of you that do, please let me know if any of you are still having troubles.
Just trying to help.
Andrew
- 0
lament10 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I've read just about everyone's comments here but I don't see that anyone has found a solution. Might be that there is none but I want to make sure.
I have Snow Leopard, and I want to use the scan feature on an HP PSC 2355.
I understand that the old HP software does not apply anymore. Instead we can print directly from the OS under the preference pane. I have also removed and added the printer, (lost the scan button altogether when I did that) and still no scanning ability.
I just want to know if anyone has found a solution at all or have I lost my scanning ability until HP/Apple decide to add the scanning printer (if at all)?
Any info on this subject would be a help.