Benches macOS

7

Samsung ML-2510

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Presumably Samsung's own updated driver (8-31-09 shown as ML-2505 SmartPanel) would do the trick and get SL a-printing.

BUT, after trying every way to head off this message (re-download, toss other Samsung drivers out, re-install, uninstall, re-re-install), every time I try to print, I get this:

"You need to install software to use this printer. To install the software, choose Software Update from the Apple menu. If the software for your printer isn’t available in Software Update, contact the manufacturer of your printer."

Well, geez. That's how I got here in the first place.

Are there some tricks I'm missing?

7 replies

Sign in or join Beachball Help to reply.

  1. 0

    lkrupp

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Open System Preferences. Select Print&Fax panel. Right click (control-click) anywhere in the window where printing devices appear. You should see an option to "Reset printing system...". Select that option and reset the printing system. Make sure your printer is turned on and connected. Now click the + sign to add a printer. Add your Samsung and see if it works now.

    Just trying to help.

    Message was edited by: lkrupp

  2. 0

    Peter Inova1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for the note.

    I did all that, and the Name and Location of the ML-2510 all fills in okay, but the Print Using says Choose a Driver or Printer Model, leading to the Apple list of printers and drivers.

    I've loaded in Samsung's own Brand New driver for SL (ML-2510_SmartPanel), but it doesn't show on the list. The Samsung new driver loads into the Library > Printers > SPanel >Samsung > ML-2510 Series folder, but does not show up in a place that the Choose Driver selector can get at it.

    If I choose the ML-2551 (Gutenprint), desperately trying to see if any close model numbers will have usable drivers as an option from Apple's list, sending a job to the printer causes it to fire up and warm up, but not print. I can awaken it, but not make it conscious.

    So near, and yet, so what.

    What's missing?

  3. 0

    sgginc

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The Smart Panel is not the driver and is a big headache.

    Download the driver for 10.6 here:

    http://www.samsung.com/uk/support/download/supportDown.do?group=&type=&subtype=& modelnm=ML-2510&disp_nm=ml-2510&language=&cate_type=all&dType=D&mType=DR&vType=&prd_i a_cd=06010400&modelcd=&menu=download

    Thanks ... Ken

  4. 0

    papermongoose

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    ikupp, thanks so much! It worked 🙂

  5. 0

    Peter Inova1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You're beautiful. Don't ever change. Your socks.

    (All but the last...)

  6. 0

    WestBeverly

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I downloaded the new driver and thought all was well. Unfortunately, I was only able to print once to my printer (attached to an Airport Extreme). A second attempt to print fails and is met with a "Looking for Printer" message within the printer queue.

    If I reset Airport Extreme, delete and re-add printer, I am again able to print one time. And then the printer goes missing again.

    Any ideas?

  7. 0

    Edward Tobin

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I used to have the same problem on OSX10.5 until I updated the firmware on my time capsule that seemed to fix my problem. I just upgraded to OSX 10.6 installed the new print driver and so far I have not had a problem