Canon Multifunction Laser (MF4370dn)
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Has anyone had success printing to a Canon Multifunction Laser (such as the MF4370dn) after installing Snow Leopard (10.6)? It is not listed as supported and Canon has not yet released an updated driver. I'm hoping that someone has found a solution... even if it is only via USB. This is currently the only thing keeping me from installing; the disc has been sitting on my desk since Friday afternoon. :
15 replies
Sign in or join Beachball Help to reply.
- 0
James012345 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Canon multifunction printers require the UFII driver. Mac OX 10.6 is not compatible with this driver.
- 0
Matthew Brownstein ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
So then is the UFII driver required for both USB and Network printing? I was under the impression that is was the network driver and was hoping there may still be an alternate driver or means available to print via USB.
- 0
ajfisher1970 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I've been able to get the printing function to work, but scanning is definitely going nowhere. I guess we have to wait for a Snow Leopard upgrade to the ScanGear software, unless someone else has a better idea.
- 0
PAHU ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Matthew Brownstein wrote:
So then is the UFII driver required for both USB and Network printing?Yes. The same driver is used for both USB and Network printing and unfortunately it does work for either connection - well at least I couldn't get it working on a clean install of 10.6.
Pahu
- 0
PAHU ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
ajfisher1970 wrote:
I've been able to get the printing function to work...Can you enlighten us how you got the printing to work.
Pahu
- 0
ajfisher1970 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If I remember correctly I downloaded and installed the most recent UFR II package from Canon's website, then I was able to add the printer under "Print & Fax" in System Preferences. I've been able to print, but trying to scan leads to a crash every time.
- 0
Eric Nix ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Spoke with someone from Canon today. He said sometime this fall we should have Snow Leopard support.
Older machines (like the MF6590) will not get support for scanner functionality. Lovely.
I encourage everyone to email [email protected]
- 0
PAHU ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If you go to the Printer list and open Options & Supplies, under the General tab what is the driver version?
If you also go to the Driver tab, under the Print Using what is shown?
Pahu
- 0
ajfisher1970 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The Driver Version is 2.0.
Under the Driver tab, it says under Print Using: "Canon MF4360-4390 UFRII LT (US)"
- 0
PAHU ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks for the that. I haven't seen a v2 of the UFR2 driver yet, so I'll check the US site and try this version with our imageRUNNERs.
One last question. Did you upgrade from 10.5.8? My testing was done with clean install of 10.6.
Pahu
- 0
ajfisher1970 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I upgraded from 10.5.8.
- 0
Matthew Brownstein ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Are you able to print via both usb and through a network? This has me ready to upgrade! Would like to know if anyone else has had success with this.
- 0
zosolive ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
My wife has the same printer, had to go back and reinstall 10.5.8 as 10.6 deleted the driver and there is no way to get one, and to boot screwed up her QuickBooks Pro accounting information for our company. In our opinion these are major bugs and I am very disappointed in Apple - I have not previously seen a system update disrupt information in an existing program - and have used their systems and computers in my office since 1984. 10.6 frees up a lot of disc space and is more efficient, but if it screws up data in existing programs and disrupts your ability to use peripherals in a way that is not fixable at the moment that is just unacceptable. On my office system I cant use Olympus software to download .dss files to the desktop for my transcription service, so again I am going to have to go back to 10.5.8. Boo!
- 0
Kerl ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok, this seems to work for all devices that rely on UFRII, so ImageCLASS MF4100 printers and the like.
For some reason the imageCLASS MF4350d on Canon's website already offers UFRII 2.0 for OSX which was released on 08/06/2009. This version works for me on 10.6, while most of the other models still offer UFRII 1.8 which does not work.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=124&mo delid=17450
If you cannot find it there, here the direct download
http://gdlp01.c-wss.com/gds/0/0100001150/03/UFRII_V200_MacOSX_usEN.dmg
Installing then should be straight-forward.
Good luck!
- 0
Stuart Stephens ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
This is what I needed. It works. Install the UFRIIV200 driver and have at it. Why Canon only gives out the UFR 1.8 variety for OS X is puzzling. Thanks!