Benches macOS

15

Samsung CLP-600n

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Like so many others, I find that my printer--a Samsung CLP-600n--simply will not work with Snow Leopard. I spent some time with Samsung tech support and found that there is no updated driver for the CLP-600n that will work with SL. The printer is only three years old, for crying out loud. They were unable to tell me when an update would be available, or whether one is even planned.

So now I am faced with three alternatives, each of which leads to a question:

(a) Hoping that a new print driver is available soon. I don't like sitting and hoping, though. Can anyone suggest some kind of work-around solution?

(b) Buying a new printer--but given the number of problems on this site, I'm wondering if ANY printer actually works with SL! (Yes, I've seen the list of supported printers, but people seem to be reporting problems nevertheless.) Any recommendations for a good printer that actually works with SL?

(c) Reverting to 10.5.8--but how do I do that?

Since my Samsung printer has been less than satisfactory in other ways, I'm leaning towards the second solution. But any advice that anyone can give on any one of the above points would be greatly appreciated! Thanks.

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    Yeegs

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I just upgraded to SL today, and my CLP-600N failed on me as well...until I read a post in the forums that redirected to
    http://support.apple.com/kb/HT3771

    In short:

    1) (Re)download the Samsung driver for Leopard (I think it's version 1.17) from their website, and run the installer, if you haven't already.

    2) Uninstall all your printers from the list in Print & Fax in System Preferences

    3) Reset the printing system

    4) Re-install all your printers, including the Samsung CLP-600, of course and use the driver downloaded in step 1.

    It should work now...at least my quick test print of the words "Test test test" from my word processor did.

    Good luck!

  2. 0

    Mary Jane Highfield

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks so much! In the meanwhile, I discovered the same page, and went through the same process. The only thing is, my printer will not print with the CLP-600 driver. However, it will print with the CLP-300 driver--go figure.

    Another thing, it only prints while connected to my computer. It does not print over my wireless network. Are you getting the printer to print wirelessly?

  3. 0

    Yeegs

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hmmm...strange. Mine DOES print with the CLP-600 driver, though come to think of it, the re-installation/resetting didn't go as well on my 2nd Mac as on my 1st - it kept giving me "rastertosec" errors when test printing. It works fine now though...I think I just tried 3-4 times before SL accepted it.

    Yes, mine prints wirelessly.

  4. 0

    JoeMacOS

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Jane,

    I have a samsung 2510. I re-installed the drivers several times... Nothing. But after Reseting the printing system it worked fine. I just never thought to try that.

    Just giving input,

    Joe

  5. 0

    echristoperj

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have a Samsung CLP-510. I Reset the Printing System, uninstalled and re-installed the old Leopard Drivers. Then re-added the printer. It gives me the correct driver, but won't print. I get an error "The printer software was installed incorrectly. Please reinstall the printer’s software or contact the manufacturer for assistance." So I look further and pull the log (which is below). I ran Repair Permissions, but that didn't help. Any one know how I can fix the file permissions below? I don't' want to have to buy a new printer. Thanks.

    E [30/Aug/2009:01:38:17 -0500] Filter "/usr/libexec/cups/filter/rastertosplcp" for printer "Samsung
    CLP510" has insecure permissions (0100777)

    E [30/Aug/2009:01:39:24 -0500] Unable to execute /usr/libexec/cups/filter/rastertosplcp: insecure file permissions (0100777)

    E [30/Aug/2009:01:39:24 -0500] [Job 1] Unable to start filter "rastertosplcp" - Operation not permitted.

    E [30/Aug/2009:01:39:24 -0500] [Job 1] Stopping job because the scheduler could not execute a filter.

  6. 0

    Community User

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I just went through the process for my 2510 and it still didn't recognize the printer. perhaps that is becausd I am using it wirelessly connected to my Airport Extreme via USB.

  7. 0

    Mary Jane Highfield

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    SUCCESS!! I uninstalled and reinstalled the printer driver--while the printer was attached to the computer via USB cable (the instructions on the Samsung site say to do that), and then went to my Airport Utility and made sure the printer was listed (a step I had omitted before). Voila, my CLP-600n now prints wirelessly! I did have to use the CLP-300 driver though. I don't care--just as long as it works!

    I had been having some other issues with the printer (frequent SMPS fan errors), but now that it's working, I'll go ahead and fix those rather than replace it.

    Thank you for your help!

  8. 0

    Yeegs

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm glad it works for you now. Those fan errors are a pain, btw. I had them frequently a while back. It magically repaired itself and hasn't happened for a while though (I hope I didn't just jinx myself!).

    Search on Google for a solution. I didn't try it, as it involves dismantling the unit and playing around with fans and wires, but by most accounts, it works and resolves the issue.

  9. 0

    Yeegs

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Not sure if it will work, but just try repeating the whole process (uninstalling print drivers, resetting the print system) a couple of times. My 2nd Mac computer gave me issues with the CLP-600 correction, but a few repeats (including RE-downloading and RE-installing the driver from the Samsung website) did the trick.

    Among the issues I had were the "installed incorrectly" message and "rastertosec" errors when trying to print.

    In short, try all over again a few times (reboot the computer also after re-installing the drivers), and who knows, maybe it will magically work out for you too.

  10. 0

    jr4cy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Just upgraded to SL and am unable to use my Samsung CLP-300. Tried downloading the driver from the Samsung Website and still will not work. Anybody else having this issue with the CLP-300? Any help would be greatly appreciated!

  11. 0

    Stuart M

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I too found my Samsung CLP-510 orphaned after upgrade to Snow Leopard when it worked just fine with Leopard. Tried all the tricks mentioned here of resetting the printing system, removing and re-add the printer, reboot, turn in a circle, swing the Rubber Chicken round your head but nothing apart from the snarky message saying the driver had not been installed correctly.

    Finally found http://www.guigo.us/mac/splix and installed that driver. The black text may not be as sharp as the native Samsung driver but at least I can print.

    I really hoped for a better transition than this....

  12. 0

    Mary Jane Highfield

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Well, I can't really figure out why I finally got my CLP-600n to work. I downloaded the driver, uninstalled, re-installed it, reset the printing, all the stuff mentioned above, no luck, and then finally it worked.

    These things seem to have helped: -When I reinstalled the driver, I made sure the printer was connected to the laptop by USB. I ran a test page, but it wouldn't print. Switched to the CLP-300 driver, and it printed just fine. -Then I unplugged the USB and plugged it into my Airport Extreme Base Station. But then I kept getting the "printer is offline" message. -So then I opened my Airport Utility and re-entered the name of the printer, ran a test page...and it printed!

    So, try different drivers from the driver list or from the link that Stuart sent; make sure your router has the correct name of your computer in it; and the Samsung download site tells you to connect your computer to the printer by USB when installing the driver, so do that, too. Plus all the other stuff Yeegs and others have mentioned.

    Samsung was of no help. E-chat totally unhelpful, and an e-mail resulted in a bland, generic message that pretty much said sorry, you're out of luck for a few weeks.

  13. 0

    askewed

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Samsung updated the CLP-600 driver as of 8/31/09

    http://www.samsung.com/us/support/download/supportDown.do?modelnm=CLP-600N&mType=DR&vType=L&dispnm=CLP-600N

  14. 0

    Mary Jane Highfield

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for the link!

  15. 0

    JKmacAgain

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Try this ... they released new drivers.

    http://www.samsung.com/us/support/download/supportDown.do?modelnm=CLP-510&mType=DR&vType=L&dispnm=CLP-510