Benches macOS

14

OS 10.4.? and Classic

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have so many projects archived in Classic applications that I don't think I can ever give it up. I have just upgraded from OS 10.3.9 to OS 10.4.7 and would like to continue upgrading, but I don't know how far I can go before I lose the ability to use Classic. What is the highest OS level I can upgrade to that will still allow Classic (and Classic applications) to operate? I am running an older 533 MHz G4 tower with 640 megs RAM. Many thanks!

14 replies

Sign in or join Beachball Help to reply.

  1. 0

    Limnos

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You lose Classic when running an Intel Mac or when running Leopard or higher. Classic works fine on a PPC up to an including 10.4.11

  2. 0

    BDAqua

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Couldn't've put it any more precise or concise than Limnos did. 🙂

  3. 0

    Glen Doggett

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I still use Classic in 10.4.11 on a PPC Mac with all the current OS updates.

    10.5 drops support for Classic on all Macs. However, even if you lose Classic environment within OS X 10.5, should you upgrade, your G4 Tower still has the option to boot into OS 9, if your model is one of the earlier ones before FW800 was introduced. OS 9 and OS X can be installed on the same hard drive partition.

    Different versions of OS X can be installed on different partitions, so you could even have a bootable 10.4 system with Classic support and try out 10.5 on another drive/partition if you needed to run 10.5 for some reason.

    "Upgrading" the OS is always a consideration of your investment in all your apps, the hardware, and third-party devices (printer/scanner/camera/etc) and all those drivers. When you upgrade the OS sometimes you need to upgrade everything else, and often the more cost-effective solution is to keep the old machine running the old stuff, and get a new machine to run new stuff. Rather than upgrading an old machine to still support the old stuff but can't quite run all the new stuff very well if at all.

    640 MB RAM is really barely enough for doing any serious work in OS X, you should consider at least 1GB or max it out to 1.5GB or 2GB, whatever the limit is for that G4 tower model. The older RAM for those models is fairly cheap now.

  4. 0

    Limnos

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I should also add that your computer doesn't meet [Leopard 10.5 Technical Requirements|http://www.apple.com/macosx/techspecs> anyway.

  5. 0

    Texas Mac Man

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You can update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update
    http://support.apple.com/kb/TA24901?viewlocale=en_US

    If you have an older Mac G4 that is capable of running Leopard, you can still run your OS 9 applications if you install OS 9.x on a separate hard drive partition.

     Cheers, Tom 😉

    User uploaded file

  6. 0

    sdavison78

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks everyone--you guys are great! I know it's an older machine, really not worthy of too much of an investment, and for the moment it does everything that I need for it to do. One day 'Trusty Rusty' will be replaced by some slinky newer model.... One more quick question: When I see the downloads of system upgrades, what is the difference between the 'standard' (smaller) one and the 'combo'? Many thanks again!

  7. 0

    Carolyn Samit

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hello,

    "what is the difference between the 'standard' (smaller) one and the 'combo'?"

    Someone correct me if I'm wrong but I'm pretty sure the Combo Update includes all patches released since the 10.5.

    I run Classic on my iBookG4 running 10.4.11. Still have a couple graphic apps I use on it.

    Carolyn 🙂

  8. 0

    Limnos

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    An update may come as an incremental update which only includes new items since the previous update, or as a "combo" (presumably the new word for "combination" and not even a proper shortening of the word - ugh!) updater which contains the components of a series of updates to be installed in one operation. The latter is handy for when you do a fresh installation (no, I won't say "install") of the operating system from discs that may represent a very early version of system and want to jump to the current version in one step.

  9. 0

    rccharles

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    "SheepShaver is an Open Source PowerPC MacOS run-time environment. That is, it enables you to run PowerPC Classic MacOS software on your computer, even if you are using a different operating system. However, you still need a copy of MacOS and a PowerMacintosh ROM image to use this program. SheepShaver is distributed under the terms of the GNU General Public License (GPL). "

    http://gwenole.beauchesne.info/en/projects/sheepshaver

    Installing Mac OS Classic on SheepShaver is a struggle. There is some instability once you have completed the installation.

  10. 0

    sdavison78

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks again, everyone! Managed to get the OS up to 10.4.11 easily, and my Classic apps work just fine. The computer seems to run a little slower, which may stem from the fact that this oldie has only a 533 MHz processor. For now I can live with it.

    Limnos, you're a 'wordsmith,' as am I. This contemporary 'passion' of making nouns out of verbs and abbreviating words makes me cringe!

    Now, if anyone can tell me how to take apart an Apple keyboard which has a penchant for producing two of a small number of letters when the keys are struck only once, I'd appreciate it. I've tried popping the offending keys off and using canned air to spray them out, to no avail. I figure I need to get inside the keyboard and give it a good cleaning but don't know how....

  11. 0

    noondaywitch

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    As mentioned above, maxing out your RAM would improve your performance, even with the relatively slow processor.

    As for the keyboard; you can clean it with soap and water - a good flushing with all the keys removed, rinse and hang up to dry out for a week or so. Obviously you will need a spare keyboard while you do this!!

  12. 0

    sdavison78

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Is this for real? Soap and water? What happens to the water that gets into the USB ports and inside the keyboard which never sees the light of day? How does it ever dry internally? And I assume you mean pry off ALL the keys? Hmmm, would Apple approve of this?...

  13. 0

    noondaywitch

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Removing the keys isn't all that difficult - you can buy a little plastic forceps-like tool to do it. However, it is
    very tedious - there are a
    lot of keys! And yes, I
    have done this when half a bottle of wine got spilled in the keyboard. And I'm typing on said keyboard now.

    However, this is no doubt overkill for your problem. You may prefer to repeat your previous exercise using the spray solvent/freezing agent obtainable for cleaning circuit boards from the likes of Maplin (or Radio Shack et al in the states).

    You
    have checked the key repeat rate set in Keyboard prefs, I assume?

    Message was edited by: noondaywitch

  14. 0

    Dan Devaney

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    We are using an iMac G-4 running OS 10.4.11. We used to have Classic also installed and our scanner; Cannon CanoScan LiDE20/LiDE 30 Ver. 1.03 used the Classic. We had some problems and the local Apple store, Kahala Mall, Honolulu, Hawaii, took care of them but when they reinstalled the OS they only put the 10.4.11 back. I still have the OS 9 on a CD. Can I reinstall that to be able to used our scanner or will doing that cause problems with OS 10.4.11?

    I used the original disk to try and install the classic and get as far as installing the soft wear update. My Mac then tells me to put the install applications disk into the machine but it is already in the Mac. Please, what am I doing wrong?