HP LaserJet 2100TN Errors in Leopard
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Greetings! First off, I must say that after searching the forums for the past hour, I've been impressed with this community, particularly Andrew (the HP developer). Unfortunately, I didn't find an answer, thus this posting! 🙂
I upgraded to Leopard about two months ago, and I get intermittent errors. I've outlined them below. I am connect via the IP JetDirect protocol.
The error usually comes when I'm printing certain graphics-intense files (such as a Microsoft Word document with several image files embedded). Here's an example of a page issued by the printer:
ERROR: undefinedresult
OFFENDING COMMAND: xshow
STACK:
[65.2 36.2 56.0 61.0 54.0 23.0 73.2 56.0 21.0 61.0 53.1 27.9999 23.0 0.0 ]
(!"#$%&’#($)*&&)
If I connect to my HP LaserJet 3330 (via USB), I'm able to print the same file fine!
15 replies
Sign in or join Beachball Help to reply.
- 0
rmegna ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I can print fine to my HP 2250tn, but after every job it prints an page which says:
ERROR: undefined
OFFENDING COMMAND:
STACK:This isn't fatal, but it is annoying and wasteful, and it started when I upgraded to Leopard. The 2250tn is a workgroup inkjet that has real PostScript, Ethernet/AppleTalk and an 80-meg memory.
I would love any suggestions on how to suppress the error page.
Thanks!
- 0
vyco ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi,
I am also terribly enoied with my "Leopard" version and my HP laserjet 2100 TN. Leopard do not recognize anymore the 3 drawers installed on the printer. With Tiger, I could choose from which drawer the print will be done (blank paper or letterhead paper or envelop). Now : nothing ! No drawers = no options are visible anymore.
Could someone help ? I have de-installed the printer, re-installed it without sucess.
Thanks in advance, VYCO - Yves - 0
- 0
- 0
n8jjo ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Same issue here after Leopard upgrade.
Issue persists after clean install.
Any ideas?
- 0
Adam Jacobi ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Does anyone look at these forums?
- 0
Brad Milton ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Same issue with HP Business Inkjet 3000
Error: undefined
Offending Command:Stack:
- 0
WebBear ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I experienced absolutely the same error message.
1. But last week I could print aout the same files with the Laserjet 2100TN without any problem.
2. Now; I went to Win XP under Parallels (on the same iMac) and printed out the same pdf (music) with the very same Laserjet 2100 TN
3. On Canon Phaser via Bonjour or IP printing the same pdf without problemsI truly hope Apple will provide us with a solution soon.
- 0
jompo ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have a HP Color Laserjet 2550 connected throw network via a PSUS4 Linksys printer server. The Laserjet was intalled via AppleTalk with the HP 2550 driver.
I got also the final page with
ERROR
OFFENDING COMMAND: D
STACK
I seemed to solve this problem by setting in the PSUS4 settings the "Communication Protocol" of Appletalk to "ascii" (in place of 'binary"). I get no more error pages.Note: I have attempted also to solve without success this problem:
- with the Gutenprint driver as seen in another forum
- by setting Laserjet by IP printing (job did'nt finish)
- by typing "sudo defaults write com.apple.print DoPostScriptErrorHandler NO" in the terminal
It seems that the resolution of the problem came from the ascii protocol - 0
forstle ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have an interesting problem with my 2100tn that I would though I would add to this thread. I am using Leopard and I have hook up to my 2100tn via 192.168.1.110 from my MacPro and my DELL Windows XP Box. My Windows box can print to it without fail. However, my MacPro requires me to turn the printer off and back on before I print. If I print a second document within say 10 seconds, it will work, but after that I have to turn it off and back on again. Any ideas here? I am using the HP LaserJet 2100 Series driver; it also says URL: socket://192.168.1.110/?bidi which I have no idea as to the meaning of that... but it will basically hang on the screen that says:
Attempting to connect to host 192.168.1.110 on port 9100 (which is the same port my Windows Box says) and then on the next line, "Connecting".
If I turn it off and back on, it will print from the queue.
- 0
Michael Crawford ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Same problem with HP-4500C using Appletalk. Worked fined before installing the last security update (day before yesterday).
- 0
LarryHN ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Try printing to the HP 2100TN as an Apple Talk printer - that is how I use mine and it works perfectly
LN
- 0
Bruce De Benedictis ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
As I wrote a while ago, this is a known issue:
http://docs.info.apple.com/article.html?artnum=307043
It occurs with other printers than just HP. - 0
roseleaf ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
After the most recent security upgrade, my LaserJet 2100TN ceased to function completely (Error: Printer not responding).
I had emailed HP some time ago asking if and when they were going to support the Leopard upgrade with new drivers. I got the following response, which I finally did today, and it works beautifully. It even fixed the Tray 1, 2, manual feed issue that someone mentioned above.
"Hello ,
Thank you for contacting Hewlett-Packard's Commercial Solutions Center.We understand that you are not able to print from OS 10.5 using your HP LaserJet 2100.
Regarding the Mac OS 10.5 when you make the upgrade or a brand new installation the Operating System should already come with the HP Drivers pre-installed and those are the ones who work with that OS. Also you can go to the Print & Fax Window and then you highlight the printer and go to options & supplies then go to drivers and from there you check what driver are you using can also select the Generic Postscript driver that should also be compatible with that printer and with your Operating System.
NOTE: Installing the Software from the HP Website might create you conflict since the drivers come already preinstalled with the OS. So we recommend doing an uninstall and then manually install them from Leopard DVD.
Removing the .gz file:
Double-click the hard drive icon, by default labeled Macintosh HD.
Double-click Library.
Double-click Printers
Double-click PPDs folder.
Double-click Contents.
Double-click Resources.
Scroll through the list until you find the HP Laserjet 2100 Series.gz file; single-click it and drag it to the Trash.
Restart and empty trash
Delete the printerInstall HP Drivers for Leopard
Insert your Leopard installation DVD, click on the Optional Installs icon
Then Optional Installs.mpkg
Then Continue
Agree to the License
Then from the Custom Install window click on the arrow next to the Printer Drivers
Then put a checkmark on the Hewlett-Packard Printer Drivers and then click on continue
Finish the installation and then restart your Mac.
Add the printer again.
Then try Printing.
Once again, thank you for contacting Hewlett-Packard's Commercial Solutions Center." - 0
harijay ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have an HP Color LaserJet 4600dn . I have tried all of the solutions culled from various sources on the web as detailed below. The only solution that worked was using the HP drivers for HPColor Laserjet 4650 that came with Leopard DVD ( early 2008) and the HP COlor laserjet 4600-GuttenPrint 5.1.3 drivers.
Between these the HP Color Laserjet 4650 driver gave better print quality with clearer text rendering.
The Guttenprint driver worked well but the text in my pdf print looked a little fuzzy.These options listed below did not work and gave various ERROR: undefined , STACK style errors
1) Connecting printer as IPP , Appletalk -NOT WORK
2) Connecting Printer as IPP with Appletalk disabled on the printer config NOT WORK
3) setting the
defaults write com.apple.print DoPostScriptErrorHandler NO
flag NOT WORK
4) Installing the standalone drivers installed using HP supplied drivers (7.8.0.761
28 Jan 2008) NOT WORK
5) Deleting the standalone drivers provided by HP in /Library/Printers/PPDs folder , reinstalling the drivers from the Leopard DVD and picking the official Leoaprd sanctionned HP Color Laserjet 4600 driver - DID NOT WORKSo strangely it seems like the issue with duplex printing to the HP Color Laserjet printers seems very nuanced and still largely broken.