Epson 2200 and Leopard
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I connected my Epson 2200 to a new intel-based IMac with Leopard. Custom installed only the Epson drivers. The printer works great once the set-up is completed and it is kept on. But, when I turn-off the 2200 and then try to print with it again, I get a communication error. Called Apple support, talked with two technicians at the Apple store and contacted Epson. No one has been able to solve the problem.
Someone suggested that Apple might have to create a patch or Epson might have to announce a software update.
Any thoughts welcome.
15 replies
Sign in or join Beachball Help to reply.
- 0
Henry Cline1 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have the same problem. R1800 and only since Leopard. I waited for the recent update to see if it was on Apples side, but I am pretty convinced it is the driver.
I just spent 30 minutes with Epson America Tech Support with a CSR named Mike. He was very nice and we went through all the normal troubleshooting procedures. Re-install driver, check connections, etc. From Espon, it is recommended to use only USB and make sure it is 2.0 cable.
I can re-create my problem. If I work in virtually any other program, I get a failed print job. If I do not touch the computer, then I have about 75% success.
Please, everyone call Epson and complain, Mike agreed it is the best thing to do at this point. The problem will be escalated to the top tier techies and they will find a solution (we hope)
1-562-276-7296
Report back here if you hear anything, I will do the same.
Henry
- 0
Pedro Schaeffer ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Interesting, I've an Epson R1800 connected via a powered USB hub (Belkin) to an iMac 24" Intel running on Leopard 10.5.2 and it works without a problem.
I print from Photoshop, Illustrator, PaintShop (CDs & DVDs) and it always works.
I'm wondering if some other app is causing the problem with you.
I know that sometimes when the printer is connected via an USB hub, things don't work as expected, but even using the Belkin USB hub I never had a problem.
Pedro - 0
Henry Cline1 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
THanks, I have a feeling this is a PPC issue? If anyone having this problem can post their basic configuration I will put together some sort of a comparison in order to continue troubleshooting this issue.
thanks,
Henry
- 0
A.J. Jones ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Henry Cline1 wrote:
THanks, I have a feeling this is a PPC issue?Maybe.., but I think I remember reading about some intels as well.
I'm using a G4 1.25 MDD having the issue with my epson stylus photo 750 - 0
Henry Cline1 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks. I have read other INtel based versions of this problem as well.
I got a call back from a senior tech support at Epson. I am encouraging EVERYONE to call him and attest to this issue. It is the best way to get a solution. They claim they are unfamiliar with hearing about the problem, but if 5-10 people all call James and explain the same problem, I can almost guarantee we will get some decent help.
James ext 8242
Epson 562.981.3840His current rec is to login in as a new user, delete the "epson" folder from the system library and reinstall current driver and try printing from that new user and see if the problem occurs. It is a very good idea and I have not done it yet, but it would answer some questions about conflicts at least.
Henry
- 0
Henry Cline1 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am trying everything that James at Epson is suggesting. Today's test was to create a new user acct, delete the entire Epson folder out of the system, reinstall and try printing again.
Communication Error
Tomorrow, test two
(after I complete my tests I will contact James again and ask "Now what" I also intend to write a letter to Epson CEO, I always get fast response when I take that route, I am not sure what to expect, but if my R1800 Printer is not compatible with a G5 Tower under Leopard, I want a new printer that is at a HUGE discount from Epson.)
Henry
- 0
Henry Cline1 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Just finished a 30 minute tech support call with an upper division rep at Epson, we seem to have fixed the problem, I was very skeptical, but so far all is well. This is exactly what we did:
Go to you user account and navigate to:
Library->Preferences. Select everything that starts with "com.apple.print" (I had nine files) Copy these files to a safe place, they contain customization to you r print settings such as paper handling and quality settings.Now delete the ones from the Library->Preferences folder.
Go to your main hard drive, not your user account, and select "Library->Printers"
Delete "Epson"
Empty Trash
Reboot
Install the latest driver from Epson for your printer.
Open the "Print & Fax" System Preference
While holding down the "control" key, click in the area where the printers are listed (left side bar). You will be presented with a pop-up menu that says: "rest printing system". Select it and your existing printers will disappear.
Add your printer back to the "Printers" list.
Close the "Print & Fax" window
Add your saved "com.apple.print" files back to the User->Library->Preferences folder
Cross your fingers.
James at Epson asked that I not use this number, which I posted earlier for future requests.
- 0
A.J. Jones ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
So Henry, you resolved the printing issue with your last post?
I was thinking it was a driver issue with the update to X.5
I'm going to try your solution post, and I'll repost with results.
Thanks,AJ
- 0
A.J. Jones ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have to concur with Henry's fix. I followed the steps that he described above, and now my Epson stylus photo 750 is working.
Thanks for the research Henry. - 0
Canyonlight ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Will Henry's process work for an Epson 2200?
This reminds me of Windows.
Thanks,
Stan - 0
duncantho ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I tried Henry's approach with my 2200 and now have a new problem, which relates to reinstalling the driver. In Print&Fax I click to add, choose Epson Stylus Photo 2200, and then am prompted to "select a driver or printer model". But which one? The list doesn't include a 2200 but offers up "Epson New Stylus Color Series, 1.3" (the closest description) and other options.
I then go to print and get an alien dialog, replacing my normal tweaking options with ones that appear to be for some other kind of machine.
Any idea how to resolve this one?
- 0
James Cook2 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have an Epson 2200 and am running 10.5.3 on a DouCore MacBook Pro. In Photoshop CS3 I cannot choose the Media Type (Matte) in order to get good prints. It doesn't offer any choice for Print Settings, as Tiger had, which is where the Media Type was selected.
I've followed Henry's steps carefully a couple of times, but have yet to resolve this problem.
- 0
Kurt Triffet ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yes, I agree, this solution is a a bit of a bust.
Downloaded latest non-beta version of Gutenprint (5.02) and installed, but no matter how you set print quality or resolution, paper print and spits out in low-res mode, with greenish monochrome color.
Amazed that Epson even offered to help on a 2200. With their "discontinued products" criteria, Epson India support makes you pay for any tech support. I personally will never buy another Epson product for this and a slew of other support reasons, but would like to get this one to work.
Trying to fiddle with it some more. Will report back if I resolve anything. - 0
James Cook2 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Epson has proven useless. They haven't answered properly submitted tech support requests. I got a tech on the phone and he insists I'm doing something wrong since my computer apparently keeps using the default drivers installed with the OS. He couldn't figure out what it was I did wrong though or provide any useful suggestions. I have repeatedly and carefully followed the steps posted here under "RESOLVED!!". I never get anything but the very same printer dialogs as before.
Gutenprint too leaves me with no ability to choose any of the higher quality printing modes needed for photos on Matte paper.
- 0
Kurt Triffet ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
To make matters worse, Gutenprint 5.02 seems to have disabled my HP Laserjet 6MP.
Think I was using an earlier version before, that worked.
Message was edited by: Kurt Triffet