Benches macOS

3

Erase and Install Tiger

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Having bought an iMac I am about to pass on my old eMac. I want to clean it up, ie remove all of the personal stuff so I want to erase and reinstall OS X. I have inserted disc 1 into the drive, double clicked on 'Install Mac OS X', clicked 'restart'. Thats as far as it goes! I don't an Installer Screen. I get a white screen that eventually turns to a black screen with a little text on it..'Invalid Memory accedss at SRRO: 05611411 SRR1: 00003030 etc etc. Then.. 'To continue booting type"mac-boot" and press return,

to shut down type "shut-down" and press return.

The very little happens occasinally I get a little file symbol in the middle of the screen with the old OS 9 'face' logo on it and that also sometimes changes to a file symbol with a flashing '?' in it, and nothing.

Can anyone help me?? Please!!

Best Regards,

Rex

3 replies

Sign in or join Beachball Help to reply.

  1. 0

    roam

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Try this: Insert the Install DVD Disk into the drive and then select Restart; when you hear the chime hold down C key until the apple logo appears.

    This will take you to the installation software.

    Select Erase and Install if that is what you want to do.

  2. 0

    Rexd

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Sorry, I have tried holding down the C after the chimes but still nothing. I am thinking that the DVD might be duff. This is the first time I have tried to use it since the eMac was new.

    Best Regards,

    Rex

  3. 0

    JMVP

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Is the OS X Install disc you're using with the eMac the one that originally came with it, or a retail (black label) OS X Install disc that came out after your eMac?

    Try removing and reseating the RAM in the eMac (see
    eMac - Do-It-Yourself). If you have two RAM DIMMs in the eMac, you can also try removing one DIMM and if you get the same invalid address report, swap that with the other DIMM. You can also try using
    Memtest after booting into single-user mode.