Problem Updating to 10.4.10
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hey guys. I just updated to 10.4.10 yesterday (From 10.4.9). After downloading the update, I restarted the computer.
Everything seems to go fine, but it had been on the loading screen (Apple logo with the spinning circle thing) for over 10 hours now, so I assume there is something wrong.
A friend suggested that spotlight just needed to reindex my files.. but I don't think it would take that long.
Any ideas?
Thanks a lot,
Ryan
9 replies
Sign in or join Beachball Help to reply.
- 0
Kappy ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
This usually happens when you don't repair the hard drive and permissions before installing the update. I suggest you can try this:
1. Repair the hard drive and permissions.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Download the 10.4.10 Combo Updater (PPC) and reinstall the update. Be sure you have no applications running when you install the update.
- 0
RDarin ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I booted up the repair disc. S.M.A.R.T. was verified, I repaired the disc, it told me that 1 Disc Was Successfully Repaired. When I booted back up, its still doing the same thing..
Side Question: If we can't get it fixed, how would I go about backing up the whole hard drive to my external drive?
Message was edited by: RDarin
- 0
Kappy ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Did you download and install the Combo Updater? Link is in my first reply but not the duplicate (that was an error on the forum.)
Your next step would be to try an Archive and Install which does not erase the hard drive. However, I would definitely backup your drive to your external drive.
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use
Disk Warrior and/or
TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a
destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from
Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.You can backup your drive by cloning it to your external drive using the Restore option in Disk Utility:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is
unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them. - 0
- 0
Shambles ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I just did a clean install on a 5 yr old eMac and did all the hours of software updates. It only got up to 10.3 and says there are no more updates. This eMac was running the latest 10.4. whatever before. Why won't it let me update to the latest OSX?
- 0
Shambles ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
See.. I'm trading this ole eMac for my wife's iBook so .. I got to get this G4 eMac back up to the latest OSX. What's the deal here? It was running OSX 10.4.10 today... then I did the clean install... geeze, does life ever get any easier?
Or does it just keep getting harder? - 0
Joe Gordon ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm shambles, why are posting in thread that is mark answered. No one will read it here, start a new one with the new topic.
Joe
- 0
Shambles ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yeah, I noticed that after my second post. Oh well, it was late. I figured out my problems though. I had a newer version of OSX I had purchased to install on some other Macs, and had also installed it on that eMac. After I reinstalled that version, it took the rest of the updates. In case you were wondering, that is.
- 0
vcatan ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am having the exact same problem - unending whirling disc while restarting after downloading the 10.4.10 updates. This appears to be great advice - one question: how do I get the disc into the computer? The disc whirls but the keyboard, including the button to open the CD/DVD compartment is locked.