Benches macOS

3

Which kernel extensions are loaded in Safe Mode?

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

To try to troubleshoot I am trying to find a list of exactly which kernel extensions are loaded in Safe Mode vs normal booting. I ask because, long story short, this is a clean install of 10.3 that only loads in safe mode (ie no 3rd part anything whatsoever). Thanks.

Long story:

Did a clean install from 10.3 disc that came with computer. Then it got wrecked. It will get past grey screen wtih apple logo and spinning gear, but will hang on blue screen. that is all. (Very rarely i will see the progress bar and the text box element "loading network..." etc. But just those two elements floating in space. it does not draw the rest of the window. I have done the following:

Zeroed out the hard disk

reset PRAM

reset NVRAM in open firmware

Reset PMU via button of main board

run a hardware check from apple dvd (all ok)

clean install of 10.3 - same error, but boots fine in safe mode

also tried a clean install of 10.4 - same error, but boots fine in safe mode

so i am at the point of trying to restore firmware or isolate specific extension that isn't loaded in safe mode that makes a regular boot barf. Does safe mode play any other tricks that might make the difference between crashing and running?

Thanks Again.

3 replies

Sign in or join Beachball Help to reply.

  1. 0

    Community User

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    First thing I would do is reformat and zero the drive.

    Safe Mode bypasses 3rd party drivers and extensions; startup items; and performs a check of the journal file and directory - but it has been 5 yrs since Panther came out and not sure what was happening back then.

    Instead of loading the "extensions.mkext" and extensions cache, it loads a fresh minimal set. Same for fonts and other cache files.

    Verbose mode show anything?

    Run Single User Mode and run fsck and/or Applejack?

    I don't know that you can "roll back" firmware updates. Even though AHT 'passes' it could be something like logicboard I suppose.

  2. 0

    Drew Reece (Re:co)

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Dangit, I just noticed you used the original OS discs for the computer, my comments below are probably irrelevant - Sorry.


    You say a clean install of 10.3 causes the same freeze at startup? What version of 10.3.x is it that is being installed?

    Does this mac support 10.3.0? You usually can't run older software on newer macs, so maybe you are installing from an earlier retail copy instead of the original OS disc that came with the G5. Is this the case?

    Mactracker says the late 2003 model used 10.3, but maybe you have an early 2004 that needs 10.3.7?

    The only solution would be to boot the G5 into target mode, boot another system from the G5's disk (one that will run 10.3) software update it to 10.3.7 (ish) and then reboot the G5.

    Message was edited by: Drew Reece

  3. 0

    Justin@vass

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Resetting my PRAM worked. I think that is what I did at least. Had to hold down the keys and wait for 5 chimes. Now it works...