Benches macOS

10

32 0r 64 bit EFI

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have a White Mid 2007 MacBook. Does it have 32bit or 64bit EFI? according to everymac dot com it's serial number indicates that it has 64bit EFI. How can I confirm that? It has 4 GB RAM installed. As expected it only sees 3 GB of RAM. What sets that limit? The Chipset? I replaced the Mac HDD with a Linux 64bit OS and 64bit EFI HDD. It boots and runs well but only sees 3 of the 4GB of RAM in the MacBook. That drive sees all the Ram in non Mac laptop.

10 replies

Sign in or join Beachball Help to reply.

  1. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Since that is an obsolete product Apple no longer maintains a spec sheet for it. According to another specs source the 2007 MacBooks have a 64-bit architecture. The EFI was in firmware but no mention whether it supported 64-bit. The EFI was used only to bootstrap the OS. At the time OS X was 32-bit. But could run 64-bit software. It was not until the release of Lion and later did Apple start the process of converting macOS from 32- to 64-bit. Your model is only able to run Lion or earlier which means the OS is still 32-bit. Even to this day there are still a few parts of macOS that have not been converted to 64-bit. Mojave is the last version of macOS that still runs 32-bit software.

    What is the reason why you wish to know if the EFI of your model is 32- or 64-bit?

  2. 0

    Borgward1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    So that I can force it to see all RAM installed. I am running 64 bit Linux on it. Some MacBook Chipsets can be forced to boot so that all RAM is avaiable to the user. everymac dot com shows the serial number of my MacBook indicates it is 64bit CPU and 64bit EFI. I want to verify that the chipset is indeed 64bit. I know that a 2006 MacBook pro can be forced to allow the user to have all of 8GB RAM. 64bit Linux runs quite well on this MacBook excepting that I can not use more that 3 GB of the installed RAM.

  3. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm sorry but I have no such information. That system could take no more than 4GBs of RAM - two 2-GB modules. However, the OS reserved the top 1GB leaving only 3GBs for the user. I do not know what would happen should you try using a total of 8GBs. It would not work in macOS. It may or may not work in Linux. You should ask the question in the Mac forums at ubuntu.com. These forums won't help you much unless you happen to come across some user who is a Linux expert. I have installed Linux on several old 2006 and 2007 MBPs. But installing and running Linux was all I tried using a dual-boot setup. Linux replaced the OS X EFI with grub which provided a startup menu for selecting which OS to use. The hardware itself was not modified from original specs.

  4. 0

    Borgward1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for the tip about Mac forums at ubuntu.com. I knew there had to be a Mac/Linux user forum somewhere. Indeed the MacBook Pro running Linux will recognize 8 GB of RAM. At least that's what the user claims. I just want to know how to verify what chipset is in my MacBook (not Pro)

  5. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The MB and MBP hardware were quite different in 2006-7 models. I have no idea if yours will work with more than 3GBs of RAM. It may when only Linux is used since the Linux OS may not try to reserve the top 1GB provided it is not a hardware limitation.

    Glad to help. Have a great weekend. 😀

  6. 0

    miyalung

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Check if this link will help:

    https://support.apple.com/kb/SP18?viewlocale=en_LAMR&locale=en_LAMR

    It shows specs and possible config for the hardware for a MacBook mid 2007

  7. 0

    Borgward1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Nothing about EFI there. Where does the EFI reside. Is it embedded in the chipset? What sets the limit of RAM available to 3 GB? - Hardware or Software?

  8. 0

    Borgward1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    That page does not mention EFI

  9. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    That model is 32-bit. The RAM limit is set by the hardware on the motherboard. It is not changeable.

  10. 0

    Borgward1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Can you show me the spec that says that the chipset is 32bit?