ipfw not logging, is the local1 facility …
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi,
I'm using, on OSX 10.6.4, ipfw with a personal set of rules, while keeping the appfirewall inactive.
My syslog.conf file is the standard one (or so I think) from Apple and it includes the line:
local1.* /var/log/ipfw.log
I get all the ipfw related messages in /var/log/kernel.log but nothing in ipfw.log
Nothing either in appfirewall.log
I have tried setting up net.inet.ip.fw.verbose to 1 and 2 via sysctl, but no change: appfirewall.log and ipfw.log remain empty and kernel.log receives all the ipfw messages.
My question is: is there a way to log ipfw messages to either ipfw.log (preferably) or (at least) to appfirewall.log
Thank you!
Miguel
7 replies
Sign in or join Beachball Help to reply.
- 0
doug pennington ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Not running Snow Leopard, but
sudo sysctl -w net.inet.ip.fw.verbose: 1maybe?
and what does
sudo sysctl net.inet.ip.fwshow?
Message was edited by: doug pennington
- 0
ibdeno ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
doug pennington wrote:
Not running Snow Leopard, butsudo sysctl -w net.inet.ip.fw.verbose: 1maybe?
Not... The only difference between net.inet.ip.fw.verbose=2 and =1 is that in the former case nothing gets logged (contrary to what Apple's "Snow Leopard Security Config" brochure states, namely, that both appfirewall and ipfw would send their messages to appfirewall.log) whereas net.inet.ip.fw.verbose=1 sends ipfw messages to kernel.log (but not to ipfw.log)
and what does
sudo sysctl net.inet.ip.fwshow?
At the moment:
net.inet.ip.fw.enable: 1
net.inet.ip.fw.autoinc_step: 100
net.inet.ip.fw.one_pass: 0
net.inet.ip.fw.debug: 0
net.inet.ip.fw.verbose: 1
net.inet.ip.fw.verbose_limit: 65535
net.inet.ip.fw.dyn_buckets: 256
net.inet.ip.fw.curr
dynbuckets: 256
net.inet.ip.fw.dyn_count: 284
net.inet.ip.fw.dyn_max: 4096
net.inet.ip.fw.static_count: 43
net.inet.ip.fw.dyn
acklifetime: 300
net.inet.ip.fw.dyn
synlifetime: 20
net.inet.ip.fw.dyn
finlifetime: 1
net.inet.ip.fw.dyn
rstlifetime: 1
net.inet.ip.fw.dyn
udplifetime: 10
net.inet.ip.fw.dyn
shortlifetime: 5
net.inet.ip.fw.dyn_keepalive: 1Thanks for the suggestions!
Miguel
- 0
Clea Rees ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I don't suppose this is helpful since so much changed between Tiger and Leopard regarding the firewall(s) and I've never used Leopard or later. However, this is what I used to get ipfw to log to ipfw.log on Tiger. According to my script, this was based on a hint from macoxhints.com to get the firewall logging and directing stuff correctly (so I'm assuming I had trouble, too).
/usr/sbin/sysctl -w net.inet.ip.fw.verbose=2
pid=`ps ax | awk '{if (match($5, ".*/ipfwloggerd$") || $5 == "ipfwloggerd") print $1}'`
if test "x$pid" != x; then
ConsoleMessage -v "ipfwloggerd is logging."
else
ConsoleMessage -v "Starting ipfwloggerd."
/usr/libexec/ipfwloggerd
fiIf you know how to get ipfw6 to log to anything but system.log, I'd be
very pleased to hear it!- cfr
- 0
Clea Rees ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I should, perhaps, have added that what works for me contradicts the man page for ipfw. According the the manual page, net.inet.ip.fw.verbose must be 1 for logging to occur. I can only say that the code I posted definitely works - I do not have an empty ipfw.log!
Do you have an executable
/usr/libexec/ipfwloggerd on your system? - 0
ibdeno ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Clea Rees wrote:
Do you have an executable
/usr/libexec/ipfwloggerd on your system?Hi Clea,
Thank you!
No, unfortunately ipfwloggerd seems to have disappeared from Snow Leopard. I activated appfwloggerd, but it does not log ipfw messages...The "Snow Leopard Security Config" manual suggests that when net.inet.ip.fw.verbose=2 ipfw messages are logged in /var/log/ipfw.log. Sadly, it is not true (or not as easy as presented there) I was hoping that someone from Apple would drop a word here...
- 0
earthsound ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Unfortunately, I can't confirm the default 10.6.x syslog facility code for the firewall, as I'm running 10.4.11 Server (there, local0 is the facility for firewall messages).
However, have you tried using either WaterRoof or NoobProof?
- 0
KXsig ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi there,
As I was getting less log messages that I wanted I made some changes to my syslog.conf and asl.conf.
If you make any changes don't forget to kill syslogd so that it reads the new settings.Here's what I did to syslog.conf:
*.crit;auth.info /var/log/anycritical
eauthinfo.log (specify the name you want)
kern.notice /var/log/kernel.log
. /var/log/system.log (this I added today as this file stopped growing)# Send messages normally sent to the console also to the serial port.
# To stop messages from being sent out the serial port, comment out this line.
*.crit macbookpro,root
*.err /dev/console
(these two lines above are going down soon, I'll add facilities here because there are many messages being flushed to my term window)# The authpriv log file should be restricted access; these
# messages shouldn't go to terminals or publically-readable
# files.
auth.info /var/log/secure.log
lpr.err /var/log/lpr.log
mail.debug /var/log/mail.log
user.notice /var/log/usernotice.log
daemon.err /var/log/daemonerr.log
syslog.crit /var/log/syslogcrit.log
news.notice /var/log/news_usenet.log
uucp.warning /var/log/unixtounixcopywarning.log
cron.notice /var/log/cron_notice.log
(above I added one entry for each Unix facility just for testing propose, only usernotice and daemonerr were started)install.* /var/log/install.log
install.* @127.0.0.1:32376
local0.* /var/log/appfirewall_lo0.log
local1.* /var/log/appfirewall_lo1a7.log
local2.* /var/log/appfirewall_lo1a7.log
local3.* /var/log/appfirewall_lo1a7.log
local4.* /var/log/appfirewall_lo1a7.log
local5.* /var/log/appfirewall_lo1a7.log
local6.* /var/log/appfirewall_lo1a7.log
local7.* /var/log/appfirewall_lo1a7.log
(as I didn't understood the localN concept I just added all, this could be also like local0,local1,local2,local3....local7.* filename.extension*.err *
(this one will be moved away too)And in asl.conf I did this:
? [T com.apple.message.domain] store_directory /var/log/DiagnosticMessages exclude_asldb
(here I specifyied "directory" as in man page, the original uses "dir")# authpriv messages are root/admin readable
? [= Facility authpriv] access 0 80
# remoteauth critical, alert, and emergency messages are root/admin readable
? [= Facility remoteauth] [<= Level info] store /var/log/anycritical
eauthinfo.log# broadcast emergency messages
? [>= Level error] broadcast
# save kernel [PID 0] and launchd [PID 1] messages
? [<= PID 1] [>= Level notice] store /var/log/kernel.log
(here I specified level and file but kept the original line below)
? [<= PID 1] store
# save everything from emergency to notice
? [<= Level info] store
# save lpr info level and above
? [<= Level error] [= Facility lpr] store /var/log/lpr.log
# save all mail, ftp, local0, and local1 messages
? [= Facility mail] store /var/log/mail.log
? [= Facility daemon] store /var/log/daemonerr.log
? [= Facility local0] store /var/log/appfirewall_lo0.log
? [= Facility local1] store /var/log/appfirewall_lo1a7.log
? [= Facility local2] store /var/log/appfirewall_lo1a7.log
? [= Facility local3] store /var/log/appfirewall_lo1a7.log
? [= Facility loca14] store /var/log/appfirewall_lo1a7.log
? [= Facility local5] store /var/log/appfirewall_lo1a7.log
? [= Facility local6] store /var/log/appfirewall_lo1a7.log
? [= Facility local7] store /var/log/appfirewall_lo1a7.log(above I reflected the syslog.conf items so they can be in accordance - and right now I found that error in my file "local14")
I used some reference from http://www.softpanorama.org/Logs/syslog.shtml
Hope it gives you some light.
Good luck.