Imported from the Apple Support Forums via the Wayback Machine 🔗
My Login Screen is stuck in an endless loop - I sign in, it goes to a blue screen for a long time and then pops back to the login window. From looking around support, I suspect corrupted plist files but can't get far enough to check it out.
Tried some earlier instructions 10.3 to access Single User mode (typing Command-S or V on startup) but they did not work.
Note I am out of town without my system disks but, if that's involved, would like instructions anyway, thx!
If booting in Safe Mode and trashing the .plist file doesn't help, boot from your install disc when you can access it so you can run Disk Utility to Verify and repair any errors on the startup disk.
There are Apple stores about 30 miles north in SF, about a 40 minute ride.
Carolyn 🙂
0
Onag·
Imported from the Apple Support Forums via the Wayback Machine 🔗
It's a complicating factor that I normally start up the machine by holding the Option key to boot from either the hard disk or a jump drive ( was setting up to test some early stage software on the jump drive). So hear the tone and go to the hard drive and jump drive icons to select the relevant startup) I don't have the jump drive with me. Does this affect your suggestion?
0
Carolyn Samit·
Imported from the Apple Support Forums via the Wayback Machine 🔗