Imported from the Apple Support Forums via the Wayback Machine 🔗
I am sure this has been addressed, but search attempts can't be narrowed down to a reasonable level.
So -
I found out that in order to run Quickbooks 2010 for Mac, I would need 10.5.x at a minimum. However, there seems to be many posts that indicate upgrading my G4 (1.67Mhz PPC) Powerbook will be problematic to impossible.
I would also need to upgrade all my Adobe Suite software, Lightroom, etc. This suddenly got very expensive.
To ask a simple direct question (okay, two!):
1) Is the upgrade from 10.4.11 to 10.5.x even successful? 2) What is the minimum version of Adobe Suite that will work on 10.5.x
Imported from the Apple Support Forums via the Wayback Machine 🔗
I don't know what posts you read that indicated upgrading your G4 (1.67Mhz PPC) Powerbook will be problematic to impossible. That is nonsense. So,
1) 100% 2) Check with Adobe.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I've run it successfully for over three years on my unsupported G4.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
What exactly have you run on which type of G4?
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Check my profile.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
As far as I can see your profile does not answer either question.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Then, I'll try again. The OP stated +I would need 10.5.x at a minimum. However, there seems to be many posts that indicate upgrading my G4 (1.67Mhz PPC) Powerbook will be problematic to impossible+ to which I replied I've been running it for over three years. The it being: *G4 450 MP GB 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2).* HTH
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I now understand and I totally agree with you.
I have used Leopard on both of my 733 MHz G4s since it was first released and have not had any difficulties.
Maximum RAM (1.5 GB) helps considerably.
I have three partitions:
1 - Clean little used 10.5.8
2 - Much used 10.5.8
3 - Historic 10.4.11 and bootable OS 9.2.2 (can also be used for Classic)
My experience is that later OSs are normally better and faster, even on old unsupported hardware.
For the uninitiated:
The latest OS that will install on G3s is Tiger (10.4.x) - can be tedious to install on early G3s
The latest OS that will install on G4s is Leopard (10.5.x) - overcoming the minimum frequency test is trivial.
Snow Leopard (10.6.x) requires an Intel processor.