Benches macOS

4

Installer not working

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hello,

I began having various problems with my macbook a couple of months ago. The problems seemed to be a bit random and unrelated to each other, (computer would take a long time to start up, iPhone would not show up in iPhoto, iChat application would quit unexpectedly each time I tried opening it, my computer began running really slowly, system update would not work, and the installer application would quit unexpectedly when I attempted to install a .dmg file.)

I called apple support and was led through using disk utility to verify/repair disk permissions booting with the installer disk. I can't remember exactly which error messages I received but I attempted to repair the disk. After doing this, the problems persisted although my computer was no longer super slow starting up.

Next I took my computer to the store and saw a mac genius who told me my hard drive was failing. I purchased a new hard drive, the new drive checked out okay with disk utility. I used carbon copy cloner to clone my old hard drive and replaced my old drive with the new one. After the installation I checked the disk again with disk utility and everything appeared fine.

After installing the new hard drive all of my previous problems were solved, except that the installer is still not working. I just ran disk utility after booting from the snow leopard install disk and for verify disk permissions I get two messages:

1. permissions differ on usr/share/derby should be drwxr-xr-x, they are lrwxr-xr-x

2. Warning: SUID file system/library/coresevices/remotemanagement/ARDAgent.app/contents/macos/ARDAgen t has been modified and will not be repaired (a message with apple support documents says can be ignored)

After repairing, the message: Repaired "usr/share/derby". appears.

I rebooted my computer in safe mode, and again ran disk utility and attempted to repair permissions and I received the same messages. Installer is still not functioning.

Here is the error report from my installer quitting.

Process: Installer [333]

Path: /System/Library/CoreServices/Installer.app/Contents/MacOS/Installer

Identifier: com.apple.installer

Version: ??? (???)

Build Info: Installer-4300100~1

Code Type: X86 (Native)

Parent Process: launchd [101]

Date/Time: 2010-02-20 14:32:50.651 -0500

OS Version: Mac OS X 10.6.2 (10C540)

Report Version: 6

Interval Since Last Report: 1490 sec

Crashes Since Last Report: 45

Per-App Crashes Since Last Report: 1

Anonymous UUID: F38F371C-3814-4E83-97B1-6685D7BAAC20

Exception Type: EXC_BREAKPOINT (SIGTRAP)

Exception Codes: 0x0000000000000002, 0x0000000000000000

Crashed Thread: 0

Dyld Error Message:

Library not loaded: /System/Library/Frameworks/InstallerPlugins.framework/Versions/A/InstallerPlugi ns

Referenced from: /System/Library/CoreServices/Installer.app/Contents/MacOS/Installer

Reason: image not found

Model: MacBook1,1, BootROM MB11.0061.B03, 2 processors, Intel Core Duo, 2 GHz, 2 GB, SMC 1.4f12

Graphics: Intel GMA 950, GMA 950, Built-In, spdisplays
integratedvram

Memory Module: global_name

AirPort: spairport
wireless_card_type_airportextreme (0x168C, 0x86), Atheros 5424: 2.0.19.8

Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports

Network Service: AirPort, AirPort, en1

Serial ATA Device: TOSHIBA MK3256GSY, 298.09 GB

Parallel ATA Device: HL-DT-ST DVDRW GWA4080M, 7.24 GB

USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000

USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0217, 0x1d200000

USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x7d100000

USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x5d200000

Thanks for any help you can provide.

4 replies

Sign in or join Beachball Help to reply.

  1. 0

    Kappy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The permissions messages are not errors but erroneous reports that can be safely ignored. They will reappear every time you repair permissions. And, I have to ask, are you repairing permissions so much. It's entirely unnecessary.

    As for the installer error which installer is this and when does the error appear? Does this installer always crash or did this only happen once?

  2. 0

    dechamp

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Since you've already replaced the drive, and your problem is still happening, it would be a good thing to discover if the problem is with the OS or the User account.

    Can you create a temporary Admin User account and see if the problem happens there also? If it does, then the OS is the problem and you can reinstall the OS and Updates without damaging your User account. If the problem goes away, then we look at fixing or replacing your User account.

  3. 0

    applefangirl

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for the replies. I tried creating a temporary administrator user account. The installer problem still occurs. Should reinstalling the OS fix the problem?

  4. 0

    Jeffrey Cedeno

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    This appears to be the exact same problem I am experiencing on my desktop, I have not been able to find a resolution yet. Have you been able to come up with a solution yet?

    Additional symptoms include inability to adjust admin settings in the system panel and an inability to log in as SU in Terminal.

    So far I've repaired the disk from the system dvd, repaired permissions, changed my admin passwords from the dvd, and reinstalled the OS with no luck. Next step is rewriting the drive from scratch, which I'd been hoping to avoid.

    My thread is here:

    http://discussions.apple.com/thread.jspa?messageID=11414542#11414542

    Thanks,

    Jeff