Benches macOS

4

Canon (Pixma) MX320 - 'No Scanner Selecte…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hello.

I got a Pixma MX320 with my mini, I had it all set up, and scanning fine last week. Now today I tried to scan something and it doesn't seem to be working right. Most of the time when I get the scanner program opened up (system pref - printers - scanner tab then open scanner) it just sits there and says 'No Scanner Selected'. Most of the time after a few minutes it just comes up with the scan dialogue, and it's good to go. It wasn't doing this before, I've installed now the drivers direct from canon, and that hasn't helped. Once it has gotten past this, it seems to work fine, untill it decides there is 'no scanner selected' again. I have it connected direct via USB, the only other printer is a Brother laser hooked up to the airport express. Any ideas??

Thanks!

4 replies

Sign in or join Beachball Help to reply.

  1. 0

    PAHU

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The scanner driver from Canon is for MP Navigator. When you use the Open Scanner button in the Print & Fax menu, this uses Image Capture which in turn uses a different scanner driver (called an ICA driver).

    I suggest you install MP Navigator that supports your MX320 and see if you get the same symptom as you have now.

    Pahu

  2. 0

    PAHU

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The scanner driver from Canon is for MP Navigator. When you use the Open Scanner button in the Print & Fax menu, this uses Image Capture which in turn uses a different scanner driver (called an ICA driver).

    I suggest you install MP Navigator that supports your MX320 and see if you get the same symptom as you have now.

    Pahu

  3. 0

    Jason Houghton1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    A quick test shows that MP Navigator works just fine. I had actually installed it when I thought I reinstalled the canon drivers, but didn't realize it installed a new application.. Thanks!

    Is there any way to reinstall the driver then that Image Capture uses? If that is the likely problem. Very odd how it worked fine a few days ago, then suddenly started doing this....

    I see all the drivers listed under the MX320 on Canon's website, but I don't have any idea which of the bunch there listed I should be using, if any, for image capture.

    Thanks!

    Message was edited by: Jason Houghton1

  4. 0

    PAHU

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Jason Houghton1 wrote:

    Is there any way to reinstall the driver then that Image Capture uses?

    You can download and install the ICA Driver v1.30. Below is the link.

    I see all the drivers listed under the MX320 on Canon's website, but I don't have any idea which of the bunch there listed I should be using, if any, for image capture.

    http://support-au.canon.com.au/contents/AU/EN/0100213301.html