Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi.
I have a Mac Pro dual 2.66 with OSX 10.6.2. I'm trying to run 'verify disk permissions' on my boot drive but both verify and repair are greyed out. Both options are available for the 2nd drive in my machine though.
I also notice that the boot drive has 'owners enabled: no' whereas the second drive has 'yes' I know I can 'get info' on the second drive and change the option that says ' ignore ownership on this volume' which I think changes owner enabled, but this option doesn't appear/exist for the boot drive.
Anyone got any suggestions on how I change 'owner enabled' to 'yes' on my boot drive (as I'm kinda hoping this will also fix the repair permissions issue'
Imported from the Apple Support Forums via the Wayback Machine 🔗
The easiest way is as follows:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line:
sudo chown root:admin
Put a space after "admin" then drag the disk icon into the Terminal window and press RETURN. You will be prompted to enter your admin password which will not be echoed.
This should set the proper privileges for the drive.
A boot volume normally does not have an option to ignore permissions which is why that checkbox option does not appear in the Get Info window.
0
johnhelliwell·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi Kappy
Thx for the reply. Tried your suggestion , it asked for my password as you said, there was no report back on success/failure just a return to the prompt. Checked the boot disc with disk utility , but still has 'owners enabled: no'. Also rebooted, but still has the same issue.
Anything else you think I can try?
thx again
John
0
baltwo·
Imported from the Apple Support Forums via the Wayback Machine 🔗
There's something else going on here. The situation you describe indicates that there's no writable OS or one that's not repairable by the boot OS, such as my mounted Leopard one that can't be repaired by Snow Leopard, on the volume you're trying to access with Disk Utility. Ensure that the volume your trying to repair permissions with is the boot volume (Apple menu->About This Mac->Startup Disk: lists the boot volume).
0
Kappy·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Try relaunching the Finder: press COMMAND-OPTION-ESC to open the task manager. Select the Finder and click on the Relaunch button.
0
johnhelliwell·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok. Gave that a go, but still the same issue. Anything else (sorry! - might as well push my luck 🙂 )
0
Kappy·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Sorry, no.
0
baltwo·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Have you verified that the grayed out volume is the boot disk?
0
johnhelliwell·
Imported from the Apple Support Forums via the Wayback Machine 🔗
NOt sure if this is the easiest way of testing that, but I rebooted holding down the option key (to get the boot selection options) and the only option I'm offered to boot from is the drive in question.
0
johnhelliwell·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have no idea whats happened but its now saying owners enabled yes and I'm now able to do a verify/repair permissions. It must be something to do with the sudo chown root:admin suggestion from Kappy but I don't know why it didn't change as soon as I ran the command instead of changing at some point during multiple reboots/power offs.
Anyway - it's fixed and thanks loads for your help!
0
baltwo·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Not sure if this is the easiest way of testing that, but I rebooted holding down the option key (to get the boot selection options) and the only option I'm offered to boot from is the drive in question.
The simplest way to determine the boot volume is via Apple menu->About This Mac->Startup Disk: which lists the boot volume. Your method only volumes that the OS considers bootable. There's no guarantee that it is the boot volume after you click Restart.
Anyway, thanks for the feedback. Apparently, you've solved the problem. Good computing.